DEWALT Scroll Saws

DEWALT   20-in 1.3 -Amp Variable Speed Corded Scroll Saw

Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16 x 23-3/4. Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included . Featured length of the flexible shaft is approximately 22 inches long

WEN   16-in 1.2 -Amp Variable Speed Corded Scroll Saw

Remember when you could make intricate and artful cuts? Let the good times scroll with the WEN 16-Inch Variable Speed Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16.25-by-10-inch table bevels up to 45 degrees for angled cuts. The adjustable air pump clears saw dust from your work area to give you a clear line of vision. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. There’s no need to fret about blade changes - the included blade holder accepts pinned, pinless, and spiral blades while the unique side panel swings open for easy access to the bottom blade holder. This package includes one 15 TPI pinned blade, one 18 TPI pinned blade, and one 18 TPI pinless blade. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

WEN   16-in 1.2 -Amp Variable Speed Corded Scroll Saw

Remember when your scroll saw could cut in 2 different directions. Take on the most intricate and artful cuts with the WEN 16 in. Variable Speed 2-Direction Scroll Saw. The 9/16 in. stroke saws through hard woods up to 2 in. T. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16 in. x 10 in. table bevels up to 45 for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2 in. dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. for pinned blades, simply pop the pins out of the front holder and turn the blade 90. Now, your cuts are no longer confined by the 16 in. throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs.

SKIL   16-in 1.2 -Amp Variable Speed Corded Scroll Saw

The SKIL 1.2 Amp 16-Inch Variable Speed Scroll Saw is an ideal addition to any benchtop workshop for woodworkers looking to make intricate cuts and patterns. This SKIL saw features electronic variable speed control for cutting a variety of materials. An integrated LED work light provides greater visibility at a variety of angles while its integrated dust removal system keeps the line free of debris for accurate cuts. The scroll saw’s titling 16- x 10-inch worktable tilts 0 to 45 degrees for precise cuts. Keyless blade change provides fast and easy blade changes and on-tool blade storage gives you easy access to additional blades.

PORTER-CABLE   18-Inches 1.6 -Amp Variable Speed Corded Scroll Saw

When you need to make detailed cuts in a variety of materials, this 1.6-amp scroll saw is the solution. The variable-speed controls can be set from 500-1,500-SPM to handles most applications. Upfront controls mean quicker access to speed, blade tension and work light. The cam action blade tension adjustment allows for quick blade changes of standard 5" long plain-end and pinned blades. The die-cast aluminum dual-tilt table allows up to 45° cuts, while the patented tabletop bevel scale provides accurate angle readings. The built-in LED lamp illuminates the work area allowing you the visibility needed to create detailed and decorative items. The adjustable dust blower keeps your cut line visible. The included steel stand is durable and sturdy, so you won’t take up space on a table or other work surface.

WEN   21-in 1.6 -Amp Variable Speed Corded Scroll Saw

Remember when you could make intricate and artful cuts. Let the good times scroll with the WEN 21 in. Variable Speed Parallel-Arm Scroll Saw. Take on woods up to 2 in. thick with an aggressive 3/4 in. stroke. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The parallel-arm drive, coupled with the steel construction, minimizes noise and vibration while the spacious 25-5/8 in. x 16 in. steel table bevels up to 45° to the left or 30° to the right for angled cuts. The adjustable air pump clears sawdust from your work area to give you a clear line of vision. This, combined with the 1-1/2-inch dust port, keeps your work area clean so you can focus on your woodworking. Blade changes are completely tool-free, so there's no need to fret - the dual side panels flip open for easy access to the bottom blade holder, making it quicker than ever to swap out pinless or spiral blades. The upper arm easily lifts out of the way and locks in place, taking the hassle out of making inside cuts. This package includes one 5 in. 15 TPI pinless blade and one 5 in. 18 TPI pinless blade. The WEN 21 in. Parallel-Arm Scroll Saw measures in at 36-1/2 in. x 16 in. x 17-3/4 in. and 53.8 lbs. and because it's a WEN product, your scroll saw comes backed by a 2-year warranty, a stocked inventory of replacement parts and a friendly customer help line, all to make sure you remember WEN.

PORTER-CABLE   16-in 1.2 -Amp Variable Speed Corded Scroll Saw

Get creative with your projects using the Porter Cable model PCXB340SS variable speed scroll saw. Using standard 5 In. long scroll saw blades, this saw is ideal for making curved cuts for puzzles, furniture and crafts.

WEN   16-in 1.2 -Amp Variable Speed Corded Scroll Saw

Remember when you could make intricate and artful cuts? Let the good times scroll with the WEN 16-Inch Variable Speed Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16.25-by-10-inch table bevels up to 45 degrees for angled cuts. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. The adjustable air pump clears sawdust from your work area to give you a clear line of vision. This combined with the 1-1/2-inch dust port keeps your work area clean so you can focus on your woodworking. There’s no need to fret about blade changes - the included blade holder accepts pinned, pinless, and spiral blades while the unique side panel swings open for easy access to the bottom blade holder. This package includes one 15 TPI pinned blade, one 18 TPI pinned blade, and one 18 TPI pinless blade. And because it’s a WEN product, your scroll saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

DELTA   20-in 1.3 -Amp Variable Speed

The Delta variable speed scroll saw accurately cuts intricate designs with low vibration.

PORTER-CABLE   16-in 1.2 -Amp Variable Speed Corded Scroll Saw

Get creative with your projects using the Porter Cable model PCXB340SS variable speed scroll saw. Using standard 5 In. long scroll saw blades, this saw is ideal for making curved cuts for puzzles, furniture and crafts.

Shop Series by Rockwell   16.0-Inches 1.2 -Amp Variable Speed Corded Scroll Saw

The Shop Series 16 inch scroll saw is a great tool for all your intricate cutting needs. A durable die cast metal body will ensure this tool will last in the harsh work environments. Variable speed control and a bevel capacity of 0 to 45° maintain high quality and efficient cuts regardless of the working material. It is also equipped with a dust port and dust blower to keep the cut line and working area clean and safe.

SHOPMAX   16-in 1.5 -Amp Variable Speed Corded Scroll Saw

Looking to add more versatility to your home workshop with tools that offers premium features and superior performance? SHOPMAX is the answer! This 16" Variable-Speed Scroll Saw is a masterpiece of engineering designed to unlock your creativity and bring your woodworking visions to life with unparalleled accuracy and finesse. Crafted with the utmost attention to detail, our scroll saw boasts the 1.5Amp motor, providing plenty of power for the most intricate cuts. Its generous 16-inch scroll capacity offers enough room to tackle large-scale projects with ease, while the variable-speed control, ranging from 400 to 1650 strokes per minute, ensures precise control over every cut. With a table tilt range of 0 to 45 degrees, you'll have the flexibility to deal with tricky angles and bevel cuts effortlessly. Plus, the dual lamp feature illuminates your workspace from multiple angles, ensuring optimal visibility for precise detailing.

JET   22.25-in 15-Amp Variable Speed Corded Scroll Saw

Say hello to Jet's 22 In. scroll saw. Combining best-in-class features with innovation and thoughtful design to create the machine you've been waiting for. The best part about this saw is the blade change process. Our exclusive upper mechanism clamps and tensions the blade in one step. In addition to the upper mechanism, the tool less lower blade holder is removable and the table features a slot for the blade. The features don't stop there: this saw offers twenty-two inches of throat capacity and an arm that tilts forty degrees left and forty five degrees right. This saw is designed to optimize your scrolling experience. From the variable speed range to a top lift, spring loaded arm it comes fully loaded with all the features you’d expect.

DEWALT   XR 20-Volt 5-in Portable Band Saw ( Battery Not Included Charger Not Included )

Cut up to 5 in. x 4-3/4 in. rectangular material and up to 4 in. round material with the 20V MAX* XR® Brushless Deep Cut Band Saw. Featuring variable speed control and an intergraded worklight, this powerful saw makes quick work of tough jobs. As a part of the expanding 20V MAX* system, this tool is compatible with 20V MAX* batteries and chargers.

DEWALT   XTREME 12-Volt 1.63-in Portable Band Saw ( Battery Not Included Charger Not Included )

The compact XTREME™ 12V MAX* 1-3/4 in. Brushless Cordless Bandsaw is lightweight at 6.54 lbs. with an integrated guard making it ideal for overhead and one-handed cutting jobs. The 1-3/4 in. cut capacity allows for cuts through small metal diameters with additional room to cut 1-5/8 in. comfortably. The variable-speed trigger helps provide control when cutting through hard materials. For added ease of use, simply hang this bandsaw when you"re ready to switch tasks with the integrated hook and illuminate dark workspaces with bright onboard LED.

DEWALT   15-Amp 14-in Metal Base Chop Saw

The D28715 14-in chop saw with quick-change and trade; keyless blade change system is powered by a 15 Amp motor for high performance without overheating. Features two tool-free systems: quick-change and trade; blade change system and quick-fence and trade; 45-degree adjustable fence reduces downtime with fast and accurate cuts.

Kobalt   24-Volt 2.5-in Portable Band Saw ( Battery Not Included Charger Not Included )

The Kobalt 24V Max portable band saw is lightweight, compact, and equipped with a brushless motor to power through the toughest applications. Designed with a 2.5-inch cut capacity and up to 550 surface feet per minute cutting speed to tackle your most demanding jobs. It is compatible with all Kobalt 24-volt batteries and chargers (sold separately), and also comes with a 5-year limited warranty.