Capri Tools Socket Extensions

GEARWRENCH   3 -Piece 3/8-in Drive Lockable Set Socket Extension Set

GEARWRENCH impact locking extensions are made from chrome molybdenum alloy steel for superior strength and durability. Drive end has a pin hole to use with pin and o-ring for securing to the impact wrench. The slide locking mechanism securely attaches socket to the extension. Extensions have a manganese phosphate coating for corrosion resistance. The extensions also feature high-visibility laser etched markings that are easy to read and allow the user to identify size quickly. The 84927N is a 3 piece 3/8 In. drive set that includes 3 In., 6 In., and 12 In. sizes.

CRAFTSMAN   3/4-in Drive 3/4-in Socket Extension

3/4-in Drive 8-in Extension Bar gives you the flexibility to get the job done easier and quicker. With the help of the extension bars reach, the extension will give you access around obstructions to be able to get the job done with ease.

TEKTON   2 -Piece 3/8-in Drive Set Socket Extension Set

Adding extra length to get past obstructions or into tight, narrow spaces, TEKTON Extensions access hard-to-reach fasteners, allowing you to work faster and avoid extra disassembly steps.

STEELMAN   9 -Piece 1/2-in Drive Set Socket Extension Set

Few things are as aggravating as reaching into a tight space with an extension only to have the fastener in the socket fall out before you could get it into place forcing you to fish it out before you can continue. The STEELMAN 95330 9-Piece Magnetic Extension Set was designed to prevent this from happening by adding a protruding magnetic tip that converts any standard length socket into a magnetic socket when attached. This set includes a 2, 4, and 10-inch extension for 1/4-inch drive sockets; a 3, 6, and 10-inch extension for 3/8-inch drive sockets; and a 2, 5, and 10-inch extension for 1/2-inch drive sockets. Each extension is knurled on the shaft to give you a secure grip when using them to hand start nuts and bolts. Each extension is made of strong and resilient chrome vanadium steel with a polished chrome plating for a lifetime of use.

KD Tools   4 -Piece 1-in Drive Wobble Set Socket Extension Set

Wobble extension 4 piece 3/8 In. set includes 3 In., 6 In., 10 In. and 12 In. wobble extensions packaged in a tray.

STEELMAN PRO   3 -Piece 1/2-in Drive Set Socket Extension Set

With the STEELMAN PRO 79989 3-Piece 1/2-Inch Drive, 3/8-Inch Pinless Swivel Impact Extension Set, you’ll be able to access hard-to-reach spaces where maximum power is needed. The set includes three swivel-tip extensions; one each at 6-inch, 9-inch, and 12-inch length. Made from premium quality, heat-treated 4140 chromoly steel with black oxide finish these extensions are designed to hold up to long use. Compared to a universal joint design, the pinless joint design found on these adapters transfers more useable torque to fasteners while adding safety by preventing projectiles common to other designs in the event of accidental breakage. The swiveling heads on these adapters provide a high degree of flexibility, allowing for a wider range of applications.

CRAFTSMAN   1/2-in Drive 1/2-in Socket Extension

The 2-in Extension Bar gives you the flexibility to get the job done easier and quicker. With the help of the extension bars reach, the extension will give you access around obstructions to be able to get the job done with ease.

TEKTON   3 -Piece 3/8-in Drive Set Socket Extension Set

The TEKTON 3-Piece 3/8 Inch Drive Impact Extension Set reaches past obstructions or into tight, narrow spaces and delivers the torque needed to break loose stubborn fasteners. A spring-loaded detent ball securely latches onto sockets, preventing them from being dropped or left stuck on fasteners. The through-hole in the drive end locks onto the tang of impact drivers. Made from premium 6140 Cr-V steel, it is precisely heat treated for superior strength and protected by a corrosion-resistant manganese phosphate finish.

GEARWRENCH   4 -Piece 1/2-in Drive Set Socket Extension Set

GEARWRENCH impact extensions are made from chrome molybdenum alloy steel for superior strength and durability. Drive end has a pin hole to use with pin and o-ring for securing to the impact wrench. The slide locking mechanism securely attaches socket to the extension. Extensions have a manganese phosphate coating for corrosion resistance. The extensions also feature high-visibility laser etched markings that are easy to read and allow the user to identify size quickly. The 84950N is a 4 piece 1/2 In. drive set that includes 3 In., 5 In., 10 In., and 15 in. sizes.