Drive Driver Sockets & Sets

TEKTON   1/2-in Drive T55 Torx Bit Driver Socket

TEKTON impact bit sockets have both a high-visibility laser size marking and a permanent stamped marking that won't wear off. They're designed for use with both friction ring anvils and detent pin anvils. Our two-piece bit socket design allows us to optimize the steel alloys, heat treatments, and forming processes for the bit and socket separately. This results in a tool that's higher performing and more durable than traditional 1-piece impact bit sockets.

CRAFTSMAN   3/8-in Drive 1/8-in Hex Bit Driver Socket

3/8-in Drive 1/8-in Hex Bit Socket allow users to speed up any job. This hex bit socket also has durable construction for use on stubborn fasteners without rounding.

TEKTON   11 -Piece Set Drive Set Triple square Bit Driver Socket Set

TEKTON S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. The tips are machined to exact tolerances for precise engagement with fasteners. The set includes a twist-to-lock socket rail that keeps the sockets securely organized.

GEARWRENCH   12 -Piece 3/8-in Drive Set Hex Bit Driver Socket Set

Living up to the reputation of the brand, GEARWRENCH chrome bit sockets deliver unprecedented speed, strength, and access to almost any job. Large, hard-stamped markings allow for easy identification and can be easily recognized as SAE (double line) or metric (knurled line). Available in standard, mid, and long bit lengths, the chrome hex bit sockets include the most commonly used sizes. The bits are manufactured from S2 steel to the highest tolerances to give a precise fit. GEARWRENCH sockets will get the job done.

CRAFTSMAN   3/8-in Drive TT45 Tamper-proof Torx Bit Driver Socket

3/8-in Drive TT45 Torx Bit Socket has a corrosion resistant chrome finish providing extra wear and tear coverage while adding hardness and durability allowing your wrench to last longer. CRAFTSMAN® socket sets meet or exceed ASME specifications.

TEKTON   1/2-in Drive T60 Torx Bit Driver Socket

TEKTON S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. The star-shaped Torx(R) bit has 6-lobes machined to precise tolerances for an exact, high-torque fit that resists camming out. TORX® is a registered trademark of Acument Intellectual Properties, LLC

TEKTON   3/8-in Drive T25 Torx Bit Driver Socket

TEKTON S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. The star-shaped Torx(R) bit has 6-lobes machined to precise tolerances for an exact, high-torque fit that resists camming out. TORX® is a registered trademark of Acument Intellectual Properties, LLC

TEKTON   24 -Piece 1/2-in Drive Set Hex Bit Driver Socket Set

TEKTON S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. The 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners. Its chamfered end easily slides into fasteners, reducing wear. The extra-long bits allow you access deep into narrow, recessed areas and come stored in a sturdy, clearly marked case.

TEKTON   1/2-in Drive T80 Torx Bit Driver Socket

Tekton heat-treated S2 steel bits are press-fit into the socket for a straight, tightly mated fit that can't loosen over time or under stress. The star-shaped bit has 6-lobes machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. Large stamped size markings are permanently impressed into the material by a roll-stamp die. Detent grooves and beveled edges provide a smooth and secure connection with the drive tool.

TEKTON   3/8-in Drive E14 External torx Bit Driver Socket

Tekton 3/8 inch drive shallow external star (E-Star) sockets are made from 50BV30 steel that's hardened to 40–47 HRC for strength and durability. The socket is protected against corrosion with chrome plating on the outside and clear coat on the inside. The socket has large, stamped markings that are permanently impressed into the material by a roll-stamp die and are as large as possible while still being readable along the socket's curved surface. Detent grooves and beveled edges provide a smooth and secure connection with the drive tool.

TEKTON   3/8-in Drive E10 External torx Bit Driver Socket

Tekton 3/8 inch drive shallow external star (E-Star) sockets are made from 50BV30 steel that's hardened to 40–47 HRC for strength and durability. The socket is protected against corrosion with chrome plating on the outside and clear coat on the inside. The socket has large, stamped markings that are permanently impressed into the material by a roll-stamp die and are as large as possible while still being readable along the socket's curved surface. Detent grooves and beveled edges provide a smooth and secure connection with the drive tool.

TEKTON   3/8-in Drive E16 External torx Bit Driver Socket

Tekton 3/8 inch drive shallow external star (E-Star) sockets are made from 50BV30 steel that's hardened to 40–47 HRC for strength and durability. The socket is protected against corrosion with chrome plating on the outside and clear coat on the inside. The socket has large, stamped markings that are permanently impressed into the material by a roll-stamp die and are as large as possible while still being readable along the socket's curved surface. Detent grooves and beveled edges provide a smooth and secure connection with the drive tool.

TEKTON   3/8-in Drive E18 External torx Bit Driver Socket

The external star sockets are a female 6-lobe geometry designed for a high-torque fit that resists slipping. These sockets are required for E-Star fasteners, which are commonly found on seat mounts, brake system components, and steering columns.

TEKTON   3/8-in Drive M8 Triple square Bit Driver Socket

TEKTON S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. Die-stamped markings are permanently impressed into the steel and can’t wear off. The triple square tip geometry is machined to precise tolerances for an exact fit with fasteners.

TEKTON   3/8-in Drive M4 Triple square Bit Driver Socket

TEKTON S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. Die-stamped markings are permanently impressed into the steel and can’t wear off. The triple square tip geometry is machined to precise tolerances for an exact fit with fasteners.

TEKTON   3/8-in Drive M10 Triple square Bit Driver Socket

TEKTON S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. Die-stamped markings are permanently impressed into the steel and can’t wear off. The triple square tip geometry is machined to precise tolerances for an exact fit with fasteners.