Prices, Promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.

Chrome Nuts

3 results

Project Source Indoor and Outdoor Decorative Nuts

Project Source 

Indoor and Outdoor Decorative Nuts

Find My Store

for pricing and availability

4.2
82
Plumb Pak 919DK 2x2 Chrome Slotted Nut and Washer

Plumb Pak 

919DK 2x2 Chrome Slotted Nut and Washer

Find My Store

for pricing and availability

Plumb Pak 917DK Slip-Joint Die-Cast Nut with Washers 1.5 in Chrome

Plumb Pak 

917DK Slip-Joint Die-Cast Nut with Washers 1.5 in Chrome

Find My Store

for pricing and availability

Related Searches

Related Products

5/16-in x 18 Zinc-plated Steel Nylon insert Nut Count

Hillman   5/16-in x 18 Zinc-plated Steel Nylon insert Nut Count

Nylon Insert Lock Nuts are used where heavy vibration is found and when a tight frictional fit is needed. This nut must be installed and removed with hand tools.

1/2-in x 13 Galvanized Steel Hex Nut Count

Hillman   1/2-in x 13 Galvanized Steel Hex Nut Count

Hex nuts are used to prevent shear movement and tension when adhering facing materials together with machine bolts. Hex nuts are commonly used in wood to wood, wood to metal, and metal to metal applications. Galvanized zinc hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

3/8-in x 16 Zinc-plated Steel Hex Nut Count

Hillman   3/8-in x 16 Zinc-plated Steel Hex Nut Count

Hex nuts are to be used with machine bolts to adhere facing materials to prevent tension and shear movement. Specifically in wood to wood, wood to metal, or metal to metal applications. Zinc grade 2 steel hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

1/4-in x 20 Zinc-plated Steel Hex Nut Count

Hillman   1/4-in x 20 Zinc-plated Steel Hex Nut Count

Hex nuts are used to prevent shear movement and tension when adhering facing materials together with machine bolts. Hex nuts are commonly used in wood to wood, wood to metal, and metal to metal applications. Grade 2 zinc steel hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

3/8-in x 16 Galvanized Steel Hex Nut Count

Hillman   3/8-in x 16 Galvanized Steel Hex Nut Count

Hex nuts are used to prevent shear movement and tension when adhering facing materials together with machine bolts. Hex nuts are commonly used in wood to wood, wood to metal, and metal to metal applications. Galvanized zinc hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

1/4-in x 20 Zinc-plated Steel Nylon insert Nut Count

Hillman   1/4-in x 20 Zinc-plated Steel Nylon insert Nut Count

These nylon insert stop nuts, also known as lock nuts, are ideal to securely fasten a bolt when connecting materials. Use these hexagonal nuts with bolts and washers of the same material, finish, and grade. The nylon ring inside the nut creates rotational resistance when displaced by a mating male threaded fastener, thus preventing loosening. The nylon insert also helps resist vibration and adds extra corrosion resistance.

1/2-in x 13 Zinc-plated Steel Hex Nut Count

Hillman   1/2-in x 13 Zinc-plated Steel Hex Nut Count

Hex nuts are used to prevent shear movement and tension when adhering facing materials together with machine bolts. Hex nuts are commonly used in wood to wood, wood to metal, and metal to metal applications. Grade 2 zinc steel hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

5/8-in x 11 Galvanized Steel Hex Nut Count

Hillman   5/8-in x 11 Galvanized Steel Hex Nut Count

Hex nuts are used to prevent shear movement and tension when adhering facing materials together with machine bolts. Hex nuts are commonly used in wood to wood, wood to metal, and metal to metal applications. Galvanized zinc hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

3/8-in x 16 Zinc-plated Steel Nylon insert Nut Count

Hillman   3/8-in x 16 Zinc-plated Steel Nylon insert Nut Count

Nylon Insert Lock Nuts are used where heavy vibration is found and when a tight frictional fit is needed. This nut must be installed and removed with hand tools.

5/16-in x 18 Zinc-plated Steel Hex Nut Count

Hillman   5/16-in x 18 Zinc-plated Steel Hex Nut Count

Hex nuts are used to prevent shear movement and tension when adhering facing materials together with machine bolts. Hex nuts are commonly used in wood to wood, wood to metal, and metal to metal applications. Grade 2 zinc steel hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

1/2-in x 13 Zinc-plated Steel Nylon insert Nut Count

Hillman   1/2-in x 13 Zinc-plated Steel Nylon insert Nut Count

These nylon insert stop nuts, also known as lock nuts, are ideal to securely fasten a bolt when connecting materials. Use these hexagonal nuts with bolts and washers of the same material, finish, and grade. The nylon ring inside the nut creates rotational resistance when displaced by a mating male threaded fastener, thus preventing loosening. The nylon insert also helps resist vibration and adds extra corrosion resistance.

5/8-in x 11 Zinc-plated Steel Hex Nut Count

Hillman   5/8-in x 11 Zinc-plated Steel Hex Nut Count

Hex nuts are used to prevent shear movement and tension when adhering facing materials together with machine bolts. Hex nuts are commonly used in wood to wood, wood to metal, and metal to metal applications. Grade 2 zinc steel hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

5/16-in x 18 Galvanized Steel Hex Nut Count

Hillman   5/16-in x 18 Galvanized Steel Hex Nut Count

Hex nuts are used to prevent shear movement and tension when adhering facing materials together with machine bolts. Hex nuts are commonly used in wood to wood, wood to metal, and metal to metal applications. Galvanized zinc hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

1/2-in x 13 Coated Steel Hex Nut Count

Deck Plus   1/2-in x 13 Coated Steel Hex Nut Count

Mother nature can be tough on your projects. Deck Plus is tougher. Hardware built for results, guaranteed for life.

1/4-in x 20 Stainless steel Steel Nylon insert Nut Count

Hillman   1/4-in x 20 Stainless steel Steel Nylon insert Nut Count

These nylon insert stop nuts, also known as lock nuts, are ideal to securely fasten a bolt when connecting materials. Use these hexagonal nuts with bolts and washers of the same material, finish, and grade. The nylon ring inside the nut creates rotational resistance when displaced by a mating male threaded fastener, thus preventing loosening. The nylon insert also helps resist vibration and adds extra corrosion resistance.

1/4-in x 20 Galvanized Steel Hex Nut Count

Hillman   1/4-in x 20 Galvanized Steel Hex Nut Count

Hex nuts are used to prevent shear movement and tension when adhering facing materials together with machine bolts. Hex nuts are commonly used in wood to wood, wood to metal, and metal to metal applications. Galvanized zinc hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

3/8-in x 16 Stainless steel Steel Nylon insert Nut Count

Hillman   3/8-in x 16 Stainless steel Steel Nylon insert Nut Count

These nylon insert stop nuts, also known as lock nuts, are ideal to securely fasten a bolt when connecting materials. Use these hexagonal nuts with bolts and washers of the same material, finish, and grade. The nylon ring inside the nut creates rotational resistance when displaced by a mating male threaded fastener, thus preventing loosening. The nylon insert also helps resist vibration and adds extra corrosion resistance.

1/4-in x 20 Stainless steel Steel Hex Nut Count

Hillman   1/4-in x 20 Stainless steel Steel Hex Nut Count

Hex nuts are used to prevent shear movement and tension when adhering facing materials together with machine bolts. Hex nuts are commonly used in wood to wood, wood to metal, and metal to metal applications. Grade 2 zinc steel hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

1/4-in x 20 Steel Cast zinc Wood insert Nut 4 Count

Hillman   1/4-in x 20 Steel Cast zinc Wood insert Nut 4 Count

Insert nuts provide strong machine screw threading in soft woods or substrates. External protrusions bite into the wood, preventing the nut from either turning or pulling out. Simply drill a pilot hole, thread in the insert with a screwdriver or T-wrench, and use a machine screw or bolt to attach the other part. Join wood, chipboard and plywood with these brass fasteners which are especially useful in knockdown furniture.

1/2-in x 13 Coated Steel Hex Nut Count

Deck Plus   1/2-in x 13 Coated Steel Hex Nut Count

Hex nuts are used to prevent shear movement and tension when adhering facing materials together with machine bolts. Hex nuts are commonly used in wood to wood, wood to metal, and metal to metal applications. Grade 2 zinc steel hex nuts are recommended for most general uses and are corrosion resistant. Be sure to pre-drill any holes and to use washers and bolts that are a similar grade and finish.

Find Durable Nuts for Secure and Versatile Fastening Applications

Nuts are essential fasteners used to secure bolts and threaded rods across a wide range of construction, repair and assembly projects. Designed to create strong, adjustable connections, they support everything from light-duty household tasks to heavy-duty structural work. Lowe’s offers a wide range of nuts suited for both indoor and outdoor applications.

Benefits of Nuts

  • Reliable Strength: They’re designed to hold bolts and threaded rods firmly in place for stable, long-lasting connections.
  • Wide Application: They’re suitable for furniture assembly, machinery, automotive repairs and general construction.
  • Easy Installation: You can tighten or remove nuts with common hand tools.
  • Style Flexibility: Options such as lock nuts and wing nuts support different fastening needs and access requirements.
  • Material Adaptability: Steel, brass and nylon options let you pick the right fastener for your project and environmental conditions.

Key Features of Nuts

  • Multiple Styles: Choose from hex nuts for standard applications, lock nuts for vibration resistance, wing nuts for hand tightening and cap nuts for a finished appearance.
  • Material Options: Steel provides strength; brass supports corrosion resistance; nylon offers lightweight or nonconductive performance.
  • Finish Variety: Nuts are available in zinc-plated, stainless steel and brass finishes to help resist wear and corrosion.
  • Thread Compatibility: They’re manufactured to fit standard bolt and rod threading for dependable fastening performance.

How to Choose Nuts

  • Nut Type: Choose hex nuts for general fastening, lock nuts for vibration-prone applications or wing nuts where you’ll need frequent adjustments.
  • Material Selection: Steel works well for heavy-duty builds; brass is ideal for corrosive environments; nylon is good for lightweight projects.
  • Finish Needs: Zinc-plated nuts are ideal for indoor use, while stainless steel and brass finishes perform well outdoors.
  • Application Load: Heavy loads may require strong nut styles designed for structural use.
  • Fastener Pairing: Ensure compatibility with the bolt diameter and thread pitch you’re using in your project.

From assembling fixtures to securing structural connections, nuts play a key role in creating strong, secure connections. Whether you’re pairing them with bolts for everyday projects or using them with threaded rods in construction and mechanical applications, these fasteners offer good strength and adjustability. Shop a wide selection of nuts and fastening solutions at Lowe’s today.

   
Ask Mylow