Adjust the brightness of a single-color LED strip with the Vrbgify V1 LED dimmer kit, designed for DC 5-36V LED lighting and a maximum current of 8A. The controller works with 5050, 3528, 2835, COB and Neon LED strips, providing a convenient way to switch the light on or off and adjust brightness with a sensitive touch slider. Its 2.4GHz RF remote offers multi-directional operation with a maximum range of 98FT or 30M in an open area. Because the remote does not need to point directly at the receiver, it can operate through walls and doors.
The factory setting provides 1-to-1 pairing, allowing one remote to control its matched receiver. The system can be decoded and paired again for 1-to-1 control or 1-to-multi pairing, helping avoid unintended control or synchronize multiple kits. The dimmer also remembers the last setting when the LED strip is switched on again. Smooth dimming and switching are designed to operate without flickering.
A selectable fade-in and fade-out function provides a 3-second light on and off time. To select this setting, press and hold the match key for 5 seconds, then press the match key 3 times; the indicator light blinks 3 times when the setting is made. The touch slider is designed for sensitive brightness adjustment and enters sleep mode after 20 seconds without operation. When the LED strip is on, press and hold the on/off key for more than 1 second to wake the slider; when the light is off, press the on/off key briefly. The back of the controller has a magnet for mounting on the included back bracket or another metal surface. The product measures 7.83 x 4.88 x 0.91 inches and weighs 3.53 ounces. Package dimensions are 7.8 x 4.9 x 0.9 inches, and package weight is 0.29 pounds.
Supports DC 5–36V single-color LED strips, including 5050, 3528, 2835, COB, and Neon types, with a maximum current rating of 8A
The 2.4GHz RF remote reaches up to 98FT or 30M in an open area and works through walls and doors without direct pointing
Factory 1-to-1 pairing lets the remote control one receiver while decoding and pairing options support 1-to-1 or 1-to-multi control
The dimmer remembers the last light setting after the strip is turned on again and provides smooth brightness adjustment and switching without flicker
Selectable 3-second fade-in and fade-out operation starts by holding the match key for 5 seconds then pressing it 3 times
The sensitive touch slider enters sleep after 20 seconds without operation, while the magnetic back mounts the controller on its bracket or a metal surface