Tekton 1/4 inch drive ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. Our low-profile head is reduced in every dimension: height, width, and length to increase access. The classic non-quick-release drive tang retains sockets with a spring-actuated detent ball—push the sockets onto the ratchet and pull to remove them. This release style gives the ratchet a flat back without any protruding release lever for best clearance. The soft overmold grip and rounded oval shape of the comfort grip handle support your palm and fingers. Tekton ratchets meet (and most far exceed) the industry standard for proof torque, a measure of strength verified by a single-cycle test that applies torque until the specified value is reached without failure or any permanent deformation. The spinner handle is made of a 6.5 inch steel extension that runs all the way through an aluminum handle and is permanently pressed in place. The tri-lobe shape feels secure in your hand and keeps it from rolling on surfaces, while the rounded knurled sections make it easy to spin quickly. The exposed shank is 2.5 inches long, and the square drive in the end of the handle lets you add a ratchet for more leverage.
90-Tooth Gear – Our fine-tooth ratchet requires only a 4-degree swing arc
Ultra-Compact Head – We reduced the size in height, width, and length
Non-Quick-Release – This classic release style offers a completely flat ratchet back for clearance
Comfort Grip Handle – The soft overmold grip and rounded oval shape support your palm and fingers
Aluminum Spinner Handle – The tri-lobe handle has deep knurling for a secure grip and a 1/4 inch drive square on the end for use with a ratchet
3 inch comfort grip ratchet; 6 inch comfort grip ratchet
6 inch comfort grip flex head ratchet
9 inch comfort grip ratchet
11/4 in drive x 6.5 Inch aluminum spinner handle
