Southwire 3/4-in Liquid Tight PVC Screw-in Connector Conduit Fittings

Everyone needs some of these!

Life changing! Best ever!

The connector is easy to use.

It was easy to connect on to the conduit and tighten. The nut was easy to tighten in the electrical box.

Useful conduit feed through gland

I bought this conduit “gland” for a project where i needed to pass through wires of an ac soft started for my home AC unit. It fit the job nicely, made of quality pvc it should easily keep the water out and last for years. I totally recommend this product if you are trying to pass through wires or pipe between a panel

Easy to use and seals well.

Exactly as described. ID is 3/4". Well made and appears that it will be watertight with the conduit that I am using.

Secure Fitting Option

This is a very easy to use conduit fitting. I mounted one end to a junction box on the wall and another end to the back of a 7500W garage heater unit mounted from the ceiling. I was able to tighten the screw inside the heater through a small access hole using only my index finger, but once it's tightened it's impossible to remove thanks to the compressible o-ring. This is perfect -- feels wonderfully safe and secure.

Not clear how it's supposed to work

Lack of instructions or visual explanation made using this product correctly impossible. I was clearly missing a part because I could not get a seal made around the wire. I ended up sealing it with electrical tape and duct tape. I still don't know what I was missing. A diagram on the bag showing all the required parts would have resolved it. I guess if I was an electrician I would have just known how to properly install it.

Okay for a plastic fitting

I've never used these before. They worked okay. Because the conduit had been wound tight in the store it created pressure. Though I cinched these down tight the "nut" pulled unevenly across the threads. This happened multiple times and I finally gave up because the connection is on the underside, out of the weather. If I needed them again I'd probably get an all metal option if available.

need to sell them 1 or more at a time.

I need 3 but had to buy 5.

Perfect for PVC to Liquidtite Conduit Transition

Good fit to screw into 1” pvc conduit female threaded fitting to transition from pvc conduit to 1” liquidtite flexible conduit. The o-ring seals well to pvc female fitting. I like the screw fitting portion that is loosened to fit the liquidtite and then tightened to make the joint waterproof.

Great water tight fitting

I needed to add a circuit to an outside panel and code requires the UF cable be protected above grade. I had the liquid tight conduit, but needed a fitting to connect it to the panel and create a water tight connection. This fitting did the trick. Easy to put on and does what it's supposed to do.