Sequentia 1.42-in x 8-ft Finished Vinyl Wall Panel Moulding

Got them from TikTok for my sons hotwheels

Saw a tiktok one day of how this person hung their hotwheels and said to get these at lowes. So of course Im a cool dad and had to do this. They work perfectly! Grab the double sided tape from lowes as well and ba bam!

Loved the idea, but the design is flawed

Even after reading a help paragraph in someones review of this moulding, I found it a waste of time and trying to insert the panels into each piece could damage them. The help I read online suggested that using a putty knife to pry open the moulding to slip in the panel helped (still a major pain). I started doing that until I realized that once one panel was inserted the moulding exerted even more pressure on the other side, making it even harder to insert the next panel. I ended up returning...

Unable to get it in

Need instructions how to put in. First panel is easy, but second side is impossible.

Not worth the trouble

Near impossible to fit onto beadboard panels. All I accomplished was to ruin the White coated edges of the beadboard. I ended up going back and buying the 1 inch lattice flat strips to cover the seams.

Good looking but aggravating to use.

Hello, Wall panel moulding can look really good, but the hard part is getting the panel's to fit into the moulding tracks sometimes. The way I did it was to start at the top or bottom and use a 10" cement trowel and carefully go down the moulding and spread the tracks open a little bit at a time. Also spraying a little silicone spray on the front of the panel edge helped it slide in a lot easier. Have someone helping you push the panel into the moulding as you go down and work it in. Also wheth...

8-ft White Wall Panel Moulding

Product look great when completed...a little hard to insert the paneling into the small track.... did the job and looks good.

8 ft. white wall panel moulding

I bought 2 strips to cut (miter board) & use as a border on our homemade chalkboard..VERY inexpensive way to frame our board... we now have a a really cool 24 by 36 magnetic chalkboard on the grandkids' playroom wall. The white moulding providing the finishing touch. My husband just glued the strips on:, no nailing, no problem.

shop around

if you need one inch cover it is good. if you can deal wit 3/4 shop around the strips are 50c cheaper same quality.