ScreenMend 6-in x 6-2/3-in Gray/Charcoal Fiberglass Screen repair

Screen Mend - Fiberglass Screen Repair

It probably works a lot better on a regular screen door but it did not work that well with the disappearing screen door that I have. It provided a good fix for the damaged part of my screen door but would not smoothly roll back into its case after added the screen mend was applied.

Easy and fast!

Very easy to use! I fixed my window screen super fast too. I'm not sure how it's going to hold up because it's only been on there a couple days but as of now I love it!!

Screen Repair

This stuff was fast and easy to fix a screen hole

It is impossible to make the mesh blend in well.

It does adhere to the screen and keep from further tearing. However, it is obvious from a distance that it is a patch.

Does not work well in the Florida heat

Did not stick to my current screening even though I followed the directions in applying it with a hair dryer.

Easy To Use

First off, I don't think the paper is supposed to be stuck to the screen. This appears to just be a separation to prevent the screen layers from sticking together. I patched six holes in my screens very easily. To begin I removed a length of paper from the patch screen. Cut lengths to size. Positioned patch. Turned on hairdryer to high and held 1 inch as directed. The hot air pushed the repair screen against the house screen and instantly melted the adhesive. You might want to wear glove...

Poor Quality

The instructions read to cut a size slightly larger than needed, and "reomve paper backing." When the tape arrived, the paper backing was already loose and not sticking at all to the tape. Further, there was hardly any glue to stick -- the tape would not stick to the screen -- I had to hold it in place while using the hair dryer on "hot," not exactly a comfortable position to be in. So far, after app. twelve hours, the patch is holding. We'll see how long it holds.

Terrible

The backing glue stays on the white paper, even if heated, and what glue stays with the mesh doesnt stick. Mesh falls off.