This solar pool heater system uses 2 PE collector panels to warm above ground or inground swimming pools without electricity, gas, or running costs. Each 2.5 ft wide panel comes in 10 ft, 16.4 ft, or 20 ft lengths and connects in series for added surface area to capture sun. The high-grade polyethylene shell handles -1 F to 194 F so the system performs through cooler months, and a kit of end caps, hose clamps, connectors, and elbows seals every joint against leaks. Mount panels on the ground, an inclined frame, or a flat roof to extend the swim season. Not recommended on asphalt shingle roofs.
Multi-Length Solar Pool Heater Kit: Two PE collector panels each 2.5 ft wide come in 10 16.4 or 20 ft lengths so the heating system scales with pool size
All-Weather PE Build: High-grade polyethylene panels operate between -1 F and 194 F to keep the solar pool heater performing from spring through fall
Solar Heat Absorption Saves Energy: PE panels absorb sunlight to warm pool water without electricity gas or chemicals to trim heating costs all season
Above Ground and Inground Pool Use: Works with above ground pools inground pools backyard hot tubs and small lap pools to extend the swim season
Complete Connection Kit: End caps hose clamps connectors and elbow adapters seal joints while roll-up panels mount on ground frames or non-shingle roofs
Specification: Color: Black; Material: PE; Overall Dimension of S: 2.5' x 10'; Gross Weight of S: 13.2 lbs; Overall Dimension of M: 2.5' x 16.4'; Gross Weight of M: 20 lbs; Overall Dimension of L: 2.5' x 20'; Gross Weight of L: 25 lbs; Box Qty: 1(May vary by batch)
