SAER 115-Volt Cast Iron Transfer Pump

This series of electric single impeller close coupled centrifugal pumps are fitted with the overhang impeller directly splined key way on to the motor shaft. The liquid pumped is conveyed into the spiral shaped volute of the pump body transforming the kinetic energy into dynamic pressure energy. Pressure and flow is achieved with minimum loss by means of the hydro dynamic closed impeller design. Industrial water supply, pressurized water using pressure vessels (autoclaves), horticultural and agricultural irrigation, civil and domestic water transfer applications. Pump body and motor support in cast iron. Pressed brass impeller. Mechanical seal in carbon/ceramic. Rotor shaft fitted with seal for life bearings. Totally enclosed fan cooled motor. Single phase motors with a built-in thermal overload protection on request, the capacitor is permanently in circuit. Motor protection. Winding insulation to class B (for motors of size 63), F (for other sizes). Capacities up to 2113 Gal./hour, heads up to 193 ft. liquid quality required clean, free from solids or abrasive substances and chemically non aggressive. SAER CMP 79 , 1 HP centrifugal pumps 115 V , single phase 60 HZ