Raindrip Drip Irrigation Mister Riser Assembly

Adds height to sprinkler, sprayer, or jet to provide plants with overhead irrigation; stake positions and secures emitter in place; Water flower beds, planting beds, vegetable gardens, trees, shrubs, and container plants

As part of a complete drip irrigation system, the sprinkler stake with riser lifts up the low-flow emitter, connects to tubing, and makes it easy to move and position the emitter and tubing in your drip system

Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

Attach low-flow emitter with barbed or threaded inlet to top of riser; attach 1/4-in supply tubing to inlet on bottom of riser; position the height of the riser, and insert stake into the ground

Riser is 8-in long and stake is 13-in long; Riser can be lowered or elevated to preferred height and fits sprinkler, sprayer, or jet with 1/4-in barbed inlet or 10-32 threaded inlet on top

Barbed inlet on riser delivers water to emitter attached to riser; 1/4-in barbed inlet on bottom of riser fits 1/4-in supply tubing with 0.170-in internal diameter (ID); Removable and reusable when you want to move or change your drip tubing layout

Riser is made of polyethylene treated with UV inhibitors to prevent cracking; Stake is made of Acrylonitrile Butadiene Styrene (ABS) treated with UV inhibitors to prevent cracking

Comes with one Sprinkler Stake with Adjustable Riser; Use with 1/4-in Supply Tubing to transport water to plants