Punch holes in supply tubing for easier insertion of 1/4 in barbed fittings and emitters with 1/4 in barbed inserts, Works anywhere along the length of supply tubing, seal unwanted openings in tubing with included goof plugs
As part of a complete drip irrigation system, the Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts; goof plugs seals openings in tubing to stop leaks
Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
Position the tool over tubing and press down with your palm; tip: avoid punching through to the other side by pinching tubing sides to shape from round to oval, creating distance so the hole punch penetrates only one wall
Hand-held tool is designed for a comfortable grip; Hole punch tip penetrates tubing wall by applying pressure with your palm
Goof plugs come attached together so they don’t get lost; easy to detach as needed
Hole Punch Tool is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking; Goof Plugs are made of polypropylene (PP) treated with UV inhibitors to prevent cracking
Comes with one Hole Punch Tool and ten Goof Plugs, Use with 1/2 in, 5/8 in, or 0.710 in Supply Tubing to punch holes to fit 1/4 in barbed fittings and emitters with 1/4 in barbed inserts