Punch holes in supply tubing for easier insertion of 1/4-in barbed fittings and emitters with 1/4-in barbed inserts; Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper
As part of a complete drip irrigation system, the Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts
Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
Position the tubing in the adjustable tubing rest (remove sliding shelf to accommodate larger sized tubing) and press the handgrip down to punch the hole; Use for supply tubing only to keep metal tip in top shape
Hand-held tool is designed with a comfortable pistol grip for strain-free use; Metal hole punch tip penetrates tubing wall when handgrip is pressed
Holds 1/2 in, 5/8 in, and 0.710 in supply tubing to punch holes to fit 1/4-in barbed fittings and emitters with 1/4 in barbed inserts; Sliding shelf on tubing rest slides out to accommodate larger sized tubing
Hole Punch Tool is made of polypropylene (PP) treated with UV inhibitors to prevent cracking, and metal
Comes with one Pistol Grip Hole Punch Tool ;Use with 1/2-in, 5/8-in or 0.710-in Supply Tubing to punch holes