Raindrip 5/8-in x 2-ft Drip Irrigation Emitter Tubing

Replace a damaged section of 5/8 in. supply tubing using a piece of the 2 ft. long supply tubing that can be cut to size

Tubing outside diameter (OD) is 0.700 in., internal diameter (ID) is 0.600 in.; connects to 5/8 in. supply tubing with 5/8 in. couplings

Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

Cut damaged section of supply tubing from existing run and replace with a piece of the 2 ft. long supply tubing cut to size; install using 5/8 in. compression couplings

Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content; the middle layer is composed of recycled content

Periodically check for leaks or damage; once or twice a year, remove end closures and flush each circuit until the water runs clear; in cold climate areas, winterize by completely draining the system to prevent lines from damage or splitting

Tubing is made of polyethylene using a combination of virgin and recycled content treated with UV inhibitors to prevent fading and cracking

Comes with one 2 ft. piece of 5/8 in. poly supply tubing. Use with 5/8 in. couplings to install onto existing tubing run. Works with Raindrip products and other products with compatible connection type

Raindrip offers a 1-year warranty; if your product breaks, Raindrip will send you a new one for free, just pay shipping and handling