Raindrip Drip Irrigation Micro Stake Assembly 3 -Pack

Adds height to sprinkler, sprayer, or jet to provide plants with overhead irrigation; stake positions and secures emitter in place; water flower beds, planting beds, vegetable gardens, trees, shrubs, and container plants

As part of a complete drip irrigation system, the sprinkler stake with riser lifts up the low-flow emitter, connects to tubing, and makes it easy to move and position the emitter and tubing in your drip system

Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

Attach a low-flow emitter with a barbed or threaded inlet to the top of the riser, attach 1/4-in supply tubing to the inlet on the stake, position the stake into the ground near the plant

Barbed inlet on stake delivers water to emitter attached to riser; Riser is 4-in long; stake is 8-in long; stake inlet fits 1/4-in supply tubing with 0.170-in internal diameter

Riser can be cut to size as needed; Riser fits sprinkler, sprayer, or jet with 1/4-in barbed inlet or 10-32 threaded inlet; Removable and reusable when you want to move or change your drip tubing layout

Riser is made of polyethylene treated with UV inhibitors to prevent cracking; Stake is made of Acrylonitrile Butadiene Styrene (ABS) treated with UV inhibitors to prevent cracking

Comes with three Sprinkler Stakes with Risers; Use with 1/4-in Supply Tubing to transport water to plants