Raindrip 1 -Port Hose Thread Irrigation Manifold with Filter

Convert an underground sprinkler system to function as both a low-flow drip system and sprinkler system

Inlet connects to sprinkler riser; outlets to sprinkler as well as 1/4-in tubing or dripline with outside diameter of 1/4-in.

Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

Thread the 1/2-in FPT inlet onto a sprinkler riser with a 1/2-in MPT connection point, and attach sprinkler head on top; connect 1/4-in distribution tubing or dripline into the compression fitting on the side

Turns existing underground sprinklers into both a sprinkler system and low-flow drip system; Filter washer inside the adapter ensures a watertight fit and screens out particles before they can clog the system

Compression fitting creates a watertight seal; internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting

Fitting is made of acrylonitrile butadiene styrene (ABS), a type of plastic, using 100% virgin content treated with UV inhibitors to prevent cracking

Comes with one 1/2-in FPT X 1/4-in Sprinkler Riser to Drip Tubing Conversion Adapter; Use with 1/4-in Supply Tubing or Dripline to transport water to plants

Raindrip stands by its product and gives a 1-year, 100% assurance of satisfaction: If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling