Project Source 2-Sone 70-CFM White Bathroom Fan (ENERGY STAR Certified)

Perfect Replacement

This fan was a perfect replacement for our other exhaust fan that had died. It was super simple to install and we didn't have to make any modifications in order to install it. Works great!

Well made LED ventilation fan

I can not install the Project Source LED Ventilation Fan in my ceiling because the existing fan was installed permanently in such a way that I cannot remove the housing from the rafters. My photos show that the existing hole is larger than the replacement fan's opening. For a retrofit you need to check existing opening before you purchase. The electrical connectors are well designed and are easy to work with. In addition, the instructions are clear and concise. I like the fan and it is well ma...

Quiet, low-profile bathroom fan that moves air efficiently and installs easily.

I installed this Project Source 8772-70-PS exhaust fan in my bathroom to replace an older, noisier unit. The design is compact and low-profile, so it fits flush against the ceiling without drawing attention. Performance wise, it clears steam and moisture quickly, and the bathroom stays fog free after a hot shower within just a few minutes. As for features, it has a clean grille cover that's easy to pop off for cleaning, and the housing feels solid rather than flimsy. Reliability has been good so...

New is not necessarily better

I was eager to replace our current exhaust fan in our first floor powder room as it was original to when the house was built. I have replaced light fixtures and ceiling fans before so I thought replacing the exhaust fan would be a fairly straightforward task, but I was very wrong. It appears that not all holes cut for exhaust fans are standard size. This required using tools that I was not prepared to utilize, but eventually I was able to retrofit the fan in. I know that most people like their f...

Supplied connectors are unreliable.

I utilized the one switch wiring, which required a jumper wire between the fan and the light. This supplied connectors did not hold up well, for the fixture to work reliably, I had to clip those connectors and use wire nuts. Overall, the fan and light do wonders for the roughly 70 square foot bathroom it was installed in once the wiring is stable. I loved the brightness and look of the LED light feature. If you are replacing a pre-existing exhaust fan, be aware of the outlet orientation!

Easy to install

We really liked the timing of receiving this fan/light since ours suddenly quit working. It took a little bit of ingenuity but my husband did great. Looks better than what we had. Better color. It was easy to install and works like a charm.

Easy installation as a replacement and quiet operation

This exhaust fan was fairly straightforward in its installation. This unit was replacing our current fan as it was making noise when running. I had to get in the attic to disassemble the old one and install this new one which was a bit of a challenge here in Texas in July (heat), but I was able to get it done fairly quickly thanks to the simple installation procedures. I chose to tie both the fan and the light into one switch as opposed to running another electric line. The fan is quiet and the...

Clean white low boise fan works well.

Fan was easy to install as it fit where old existing fan was. This fan did not come with a light but has a clean white cover that easily removes if you need to clean. The fan itself is not very noisy but does seem to work well.

Allow about an hour for install if you have to cut the Sheetrock. If not, allow 30 minutes.

This bathroom exhaust fan was packaged well and came with detailed instructions. This one is of good quality. We used this to replace an old bathroom exhaust fan. The install will require a drill to screw into wood frame or Phillips screw driver, wire strippers, and wire linesman. You will need a Sheetrock saw, if your pre existing exhaust fan is not the same size and was smaller, you will need to cut some of the Sheetrock for this one to fit in the space. Make sure your power to the exhaust fan...

Easy to install and sleek design

This LED ventilation fan is a great choice both in value and multipurpose functionality with lighting added. It is very sleek against the ceiling and easy to install. The motor is quiet with minimal vibration, and can easily vent a bathroom. Cleaning it should also be easy, by popping the clips and reaching the motor easily, so maintance for long term use is good.