Transition from garden hose or hose bibb to a low-flow drip irrigation system with the 5/8 in. X 3/4 in. FHT Compression Swivel Elbow. Installation is quick and easy—just screw the elbow onto the 3/4 in. MHT connection point, then push the 5/8 in. tubing or dripline into the other end, where an internal barb compresses the tubing for a watertight fit. Fitting has a swivel feature to keep tubing from kinking or bending. Filter washer inside screens out particles. The compression swivel elbow is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking. Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, drip fittings are connectors that attach sections of tubing together or to other drip irrigation parts. Drip irrigation gradually and evenly waters the root zone of your plants, keeping it moist but never saturated with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.
Transition from garden hose or hose bibb to drip irrigation
3/4 inch FHT inlet fits 3/4 MHT connection; outlet fits 5/8 inch tubing
Swivel makes it easy to install elbow without kinking tubing
Works in a variety of areas, from small to large, flat or sloped, to connect a water source to distribution tubing
Thread the 3/4 inch FHT inlet onto a garden hose or hose bibb with a 3/4 inch MPT connection point, on the other end, insert 5/8 inch distribution tubing or dripline into the compression fitting, where an internal barb will compress the tube to hold it in place
Compression fitting creates a watertight seal, internal barb that compresses the inserted tubing to hold it in place, unlike a barbed fitting, the tubing is not stretched out to connect to the fitting
Fitting is made of acrylonitrile butadiene styrene (ABS), a type of plastic, using 100% virgin content treated with UV inhibitors to prevent cracking
Comes with one 5/8 inch X 3/4 inch FHT Compression Swivel Elbow
Works with Raindrip products and other products with compatible connection type
