Moen Posi-Temp 1/2-in ID Compression x 1/2-in OD Brass Pressure Balancing Valve for Shower and Faucet
Item #158429 |
Model #2510
This Item Is Featured In
MOEN M-PACT COMMON FAUCET VALVE SYSTEM: Update the faucet style in the future without replacing any plumbing
CONNECTION SIZE: 1/2' (0.5 inch) IPS connections
NUMBER OF PORTS: The water valve has 4 ports
PLASTER GROUND INCLUDED: The water valve includes plaster ground for effortless flush-to-wall installation and meets ASSE performance requirements
TEMPERATURE CONTROL: The positemp valve helps maintain water temperature
TRUSTED PERFORMANCE: Moen's shower valve is backed by a Limited Lifetime Warranty
General | |||
|---|---|---|---|
Series Name | Posi-Temp | Application | Shower and faucet |
Type | Pressure balancing valve | Inlet Thread Type | Compression |
Material | Brass | Maximum Pressure PSI | 0 |
Dimensions | |||
|---|---|---|---|
Inlet Diameter | 1/2-in | Outlet Diameter | 1/2-in |
Inlet Size in Inches | 1/2-in | ||
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | No | Complies with Federal Lead Guidelines | Yes |
Warranty | |||
|---|---|---|---|
Warranty | Limited lifetime | ||
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 30181800 | ||
Check out the Best Selling Tub & Shower Valves on Lowes.com
Ratings may include incentivized customer reviews.
Easy Install
Super easy install. Took about 25 mins top to set up. Only thing I can suggest is to make sure you turn the valve to “off” position before turning the main water source back on. I forgot to.
Quality Item
Moen products are the best. Easy to install and sturdy design.
Read installation instructions
This product fit and worked exactly as described. Easy to install fittings of copper or pex.
Good replacement piece
It was a perfect fit for what we were replacing. No issues with installation.
great
very solid, easy to work with. as shown and expected
Wrong advice
The wrong size Valves were recommended, and now I need to return these valves.
From Posi-Temp 1_SLASH_2-in ID Compression x 1_SLASH_2-in OD Brass Pressure Balancing Valve for Shower and Faucet Verified Purchaser
Easy to install, but big problems long term
These are easy to install, but have big problems long term. The valve cartridge is the problem. The elongated oval shaped seals on the sides of the valve cartridge come out of their slots and often leak a little bit or even partially or fully block the ports on the sides of the valve body for hot and cold water supply. This leads to a valve cartridge that is nearly impossible to remove. I have seen a number of these over the years, and I always try to replace the whole valve now (usually with a ...
23 Questions
2
Answers
2
Answers
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
Thank you so much for the feedback you posted on the website. Moen takes consumer comments very seriously and we are delighted to have the opportuni...