Liquid Rubber RV Roof Coating Sealant is a liquid that cures into a waterproof membrane. It can be used on all types of RV roofs, campers, trailers, mobile homes and more. It is environmentally friendly, containing no Solvents, or VOC's. Ensure a clean, dry surface. Use Acetone as a conditioner on EPDM roofs. Use EPDM Primer on EPDM Roofs. EPDM is a rubber sheet membrane. Use LIQUID RUBBER SEAM TAPE to bridge seams, joints, vents, protrusions to create a long lasting repair or rejuvenation. Apply when temperature is above 50F/10C. Apply to a dry surface, that is free of anything that would hinder adhesion. Typically cures within 24-48 hours. Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forecasted within 24 hours. Coverage - Apply a minimum final thickness of a 1 gallon/50 sq ft (4.65 sq m). It should require around 2-3 heavy coats. One 5 gallon pail of RV Roof Coating will coat RVs up to 30 feet. Be sure to use up all material. Apply next coat when dry to touch and nothing is wet underneath; Tacky is okay. Generally, 6-8 hours between heavy coats. Amounts vary depending on surface roughness. If you have dipping or ponding areas, apply a detail coat to the area prior to full application. Use all material up to achieve a long lasting membrane. Avoid hot, direct, intense sunlight during application. Remove Painters Tape while still wet. Clean Up - Use soap and water or mineral oil to clean skin.
FLEXIBLE RV ROOF COATING - Solar reflective, cool roof & UV resistant
PROTECTIVE SEALANT FOR - RV roofs, this superior RV Roof Coating formula protects against leaks and breakdown due to the weather
EASY TO APPLY - Just like painting; Apply by brush, roller or high quality paint sprayer; Use heavy coats to build up the waterproof membrane; You can close the container and use later if you have left over material
ENVIRONMENTALLY FRIENDLY - Liquid Rubber RV Roof Coating is water based, containing no solvents, or VOC's; Safe for humans and pets alike, can be used indoors and outdoors with no special breathing apparatus
COVERAGE - Apply a minimum final thickness of 1 gallon/50 sq ft (4.65 sq m), Should require 2-3 heavy coats; 1 x 5G pail will coat RVs up to 30 feet; be sure to use up all material
