LILILIAN FMY 24in Full Extension Soft Close Ball Bearing Drawer Slides with Side Rear Mount Brackets 2 Pairs for Two Drawers

LILILIAN FMY drawer slides provide a 24in or 610mm slide length for two drawers and are supplied as 2 pairs, totaling 4 drawer slides with brackets. Matching screws are included with the set. The slides support side mounting or rear mounting, giving the included brackets a stated installation orientation for the drawers. Each slide has a listed width of 1 3/4in or 45mm and requires 1/2in or 12.7mm clearance on each side. Check the available drawer and cabinet space against these measurements before installation. The slides are made from cold rolled steel and finished with zinc plating. Their listed load capacity is 78LB or 35KG. Because the source information does not assign that capacity to a particular slide, pair or drawer, the stated rating is presented as listed. Full extension construction allows the drawer slide to extend fully, while ball bearing movement supports the listed slide design. Soft closing and self closing action are included features. A lever disconnect is provided for easy drawer removal, which can assist access when the drawer needs to be taken out for fitting or service. The product listing gives a product weight of 8.79 pounds and product dimensions of 1 x 1 x 1 inches. These are kept separate from the shipment information: the package dimensions are 26 x 8 x 6 inches and the package weight is 42.2 pounds. Use the supplied matching screws and verify the mounting space, side clearance and drawer arrangement before installation. The set is identified for two drawers and contains the slides and brackets needed for that quantity. The combination of full extension, ball bearing construction, soft closing action, lever disconnect and zinc plated cold rolled steel construction describes the supplied drawer slide set without adding measurements or performance details beyond the listed specifications.