Kobalt 12 -Piece Metric Tap and Die Set
Item #5036568 |
Model #59952
Tap and die set includes the most common machine screw and fractional plug taps and 5/8 in hex dies plus necessary drive tools
Set includes 3 mm, 4 mm, 5 mm, 6 mm, 7 mm metric
Thread pitches size includes 0,5 and 0,7 and 0,8 and 1,00 and I,00
General | |||
|---|---|---|---|
Color/Finish Family | Stainless steel | Measure Type | Metric |
Material | High carbon steel | Piece Count | 12 |
Package Contents | 5pc taps,5pc dies,1pc stocket,1pc tap wrench | ||
Dimensions | |||
|---|---|---|---|
Die Stock Size/Sizes | 0~1/2 in | Metric Tap Sizes | 3MM-0.50,4MM-0.70,5MM-0.80,6MM-1.00,7MM-1.00 |
Metric Die Sizes | 3MM-0.50,4MM-0.70,5MM-0.80,6MM-1.00,7MM-1.00 | Tap Wrench Size/Sizes | 0~1/2 in |
Features | |||
|---|---|---|---|
Case Included | No | Tap Wrench Included | Yes |
Die Stock Included | Yes | ||
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | |||
Warranty | |||
|---|---|---|---|
Warranty | 3-year limited | ||
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 27112800 | ||
Check out the Best Selling Tap & Die Sets on Lowes.com
Ratings may include incentivized customer reviews.
What Customers Are Saying
The Kobalt Metric Tap and Die Set received mixed reviews. On the positive side, customers found the taps and dies to be well-made and able to cut threads cleanly and accurately. The range of sizes included was also appreciated. However, some customers reported issues with the tap holder not securely holding the smaller taps, making them difficult to use effectively. The T-handle design was also criticized as poorly designed and hard to tighten properly. While a capable tool set, customers should be aware of the potential challenges with the smaller components.
Customer review summary generated by AI, including incentivized reviews.Small Tap & Die set
Worked well.
Verified Purchaser
Great set
Was exactly what I needed
Verified Purchaser
Size availability
I like the selection of sizes. I didnt have to buy an entire set. This set has 6mm & below. The set I have, the smallest was 7mm.
Verified Purchaser
Good investment, did exactly what I needed.
Needed this urgently and my local Lowe's had them on the shelf. I used the Tap and Die for a project on my motorcycle and both worked perfectly for what I needed. I also used two of the dies to clean up some fasteners on the old bike while I was working on it. Good tools are investments and I think these will last a long time.
Handy Little Set
Seems to work like it should, a little light but just what I needed to fix a weld nut
Verified Purchaser
Tap & die
Used them for stripped bolt work great
Verified Purchaser
Decent for what is it
Works but you have to be really careful because it snaps if there's any sideways force
Worked well
Worked well, disappointed it didn't have a case to keep it in. I had to put it back in packaging.
2 Questions
1
Answer
1
Answer