KAIWEETS 600A AC/DC True RMS 6000-Count Auto-Ranging Digital Clamp Meter 600V with LPF LowZ NCV Temperature and Work Light
Item #9201135 |
Model #HT206D
Marketplace items sold by a third party are not eligible for Lowe’s offers.
KAIWEETS builds practical electrical test instruments for electricians, HVAC technicians, automotive technicians, contractors, and maintenance professionals. The HT206D combines a 600A AC/DC clamp meter with a full digital multimeter in one 6000-count True RMS tool.
Measure AC or DC current through the clamp in 60A and 600A ranges, plus AC/DC voltage up to 600V. True RMS supports dependable AC measurements on non-linear loads, while LowZ helps reduce ghost-voltage readings and the low-pass filter improves measurements around variable-frequency drives, motors, and transformers.
The meter also measures resistance up to 60 megohms, capacitance up to 4mF, frequency up to 10MHz, duty cycle, continuity, diode, and temperature from -40 to 1832 degrees F. NCV detection supports preliminary energized-circuit checks, while the two-color backlight and built-in flashlight improve visibility.
Rated CAT III 600V with double-insulated construction, the HT206D includes test leads, a K-type thermocouple, two AAA batteries, a durable EVA bag, and a 3-year limited warranty.
What's Included
• HT206D Clamp Meter ×1
• Test Lead Pair ×1
• K-Type Thermocouple ×1
• AAA Batteries ×2
• Durable EVA Bag ×1
• User Manual ×1
600A AC/DC CLAMP METER: Measure AC or DC current up to 600A and AC or DC voltage up to 600V with True RMS performance and a clear 6000-count auto-ranging display.
LPF FOR MOTOR TESTING: Low-pass filter mode helps reduce high-frequency interference during AC current and voltage checks on motors, drives and electronically controlled equipment.
LOWZ GHOST-VOLTAGE REJECTION: Low-impedance voltage mode helps suppress misleading ghost-voltage readings caused by capacitive coupling in adjacent energized wiring.
FULL MULTIMETER FUNCTIONS: Test resistance to 60 megohms, capacitance to 100mF, frequency to 10MHz, 1% to 99% duty cycle, continuity, diodes and temperature from -4°F to 1832°F.
NON-CONTACT VOLTAGE CHECK: The NCV sensor provides low- and high-field indications with changing audible alerts for quick preliminary checks near outlets, cables and conductors.
CLEAR FIELD VISIBILITY: The display lights orange when measured current exceeds 1A, while the built-in work light and 20-second backlight help in panels and dim work areas.
READING TOOLS INCLUDED: MAX/MIN captures changing values, Data Hold freezes the reading, zero correction supports AC/DC current measurements and auto power-off saves battery life
CAT III 600V DESIGN: The double-insulated meter is rated CAT III 600V and measures 8.94 inches long by 4.53 inches wide by 1.77 inches deep with a 0.89-pound product weight.
COMPLETE 3-YEAR KIT: Includes the HT206D clamp meter, one pair of test leads, K-type thermocouple, two AAA batteries, durable EVA carrying case, user manual and 3-year warranty.