The JOWEI robotic pool cleaner replacement set supplies four guide wheels and two pulley gears for repairs to compatible pool cleaning machines. Intended as a replacement for part number 3884997-R6, the set addresses guide wheels and drive pulley gears that have worn or broken during use. These are replacement components for a compatible cleaner, rather than a complete pool cleaning machine.
Compatibility includes Maytronics Dolphin cleaners and the Nautilus CC Plus, M200, M400, M500, M4, M5, DX3, DX4 and DX6 models. The supported model list also includes Prowler 820, Prowler 830, Wave 50, Wave 75, Wave 90, Wave 2X2 Gyro, Quest, Premier, Apollo Plus, Discovery, Nautilus, C5 and C6 Plus. Additional compatible models are Advantage Plus RC, Advantage Plus Pro RC, Deluxe 3, Deluxe 4, 3001, DLX 4, Deluxe 5, HD, PROX2, Edge, Triton, Triton Plus, Heavy Duty and Orion robotic pool cleaners. Match your cleaner model and replacement part number to this compatibility information before selecting the set.
The repair involves replacing four idlers and two drive gears inside the cleaner. Opening and closing the unit is identified as the most difficult part of the repair, and the components need to line up properly during reassembly. Pay attention to how the cleaner comes apart and to its labeling when returning the components to position.
The listed product measurements are 6.9 x 5.7 x 0.75 inches, and the listed product weight is 1 pound. These measurements are separate from the package measurements of 5.4 x 4 x 2.9 inches; the package weight is also listed as 1 pound.
This replacement set includes four guide wheels and two pulley gears for robotic pool cleaner repairs involving worn or broken guide wheels and drive pulley gears
Designed to replace part number 3884997-R6, this guide wheel and pulley gear set fits compatible Dolphin robotic pool cleaners, including the Nautilus CC Plus
Supported cleaner models include M200, M400, M500, M4, M5, DX3, DX4 and DX6, along with Prowler 820 and 830 models and Wave 50, Wave 75 and Wave 90 models
Additional compatible cleaners include Premier, Apollo Plus, Discovery, Nautilus, Edge, Triton and Triton Plus models, as well as Wave 2X2 Gyro and Quest
Installation involves opening the cleaner, replacing four idlers and two drive gears, and aligning the components properly before closing the unit
Listed product dimensions are 6.9 x 5.7 x 0.75 inches with a weight of 1 pound, while package dimensions are listed separately as 5.4 x 4 x 2.9 inches
