J-B WELD 2-in x 48-in Pipe Wrap Tape
Item #3676221 |
Model #38248
Includes one 2-in x 48-in wrap, gloves, 1 oz epoxy putty, and securing bandage
Easy to use like a cast: wet, apply, done
Holds water pressure up to 500 PSI when used with epoxy putty
Great for repairs and preventative reinforcement on pipes made from copper, cast iron, PVC, ABS, galvanized steel, and more!
General | |||
|---|---|---|---|
Color/Finish Family | White | Package Quantity | 1 |
Manufacturer Color/Finish | White | Use Location | Interior/Exterior |
Dimensions | |||
|---|---|---|---|
Length (Inches) | 48 | Width (Inches) | 2 |
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | No | ||
Warranty | |||
|---|---|---|---|
Warranty | None | ||
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 27112500 | ||
Check out the Best Selling Pipe Wrap Tape on Lowes.com
Ratings may include incentivized customer reviews.
What Customers Are Saying
This pipe repair product has mixed results. Many customers reported it worked well to temporarily stop small leaks when used as directed, but a significant number also said it failed to stop leaks, even when following instructions. Common issues included poor adhesion, leaking around edges, and difficulty applying in tight spaces. The product's effectiveness seems to depend on the specific application and how well the instructions are followed.
Customer review summary generated by AI, including incentivized reviews.Used on a very slow "drip" leak, sealed it nicely.
It worked as described.
Verified Purchaser
Great temporary fix
Product was a life saver to stop a pin hole leak until plumber could come out. It is a bit messy to apply & challenging in tight spaces but overall for the money it worked well. see
good to have in case
Glad this was around when I needed it. The epoxy had developed some hard bits that I left out of the mix, and yes, it's tough to use in tight spaces, but the leak formed in a 1" piece between elbows; tell me what else was going to have a chance at fixing that in just an hour. The black cloth didn't so much come off after, but oh well.
Did not work on my copper pipe!
The copper pipe was in a tight spot and this thing is super sticky and was tough to wrap ! started hardenening fast and was super sticky. Sadly, after 3 hours of hardening it was still leakingna dnow I have to figure out how to remove this dang wrapped crap(:-
Verified Purchaser
It does not work
it does not work. It was still leaking
Verified Purchaser
Sounds like it was not wrapped tightly enough but contact us at jbweld.com so we can get more details of the repair and help you.
Doesn't stick well
I sanded to copper pipe and cleaned it with alcohol so no particles were left, I kneaded the the putty until it was one color. the putty would not stick to the copper. I tried to hold it in place with the resin wrap , but that was even more slippery. Pretty much a total fail.This might work if you had the pipe on the middle of the room with access from all sides and 4 hands
From JBWeld.com
Beast mode repair
Best stuff out there to fix anything holding pressure like a pressure washer hose! Pipes too and shovels!
Verified Purchaser
Stops shower leaks
It works and dries fast. It's good in an hour.
Verified Purchaser
6 Questions
6 Questions
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
Add more of the wrap to the existing first