Expand the hauling potential of your vehicle bed with this heavy-duty 2-in-1 metal hitch extender capable of supporting 750 lbs (340 kg). Manufactured from high-strength structural metal coated in a weather-resistant finish, this rugged support arm prevents long, flexible loads from dipping toward the pavement during transit. The adaptable configuration mounts horizontally to stretch cargo beds forward by 55.70 inches with an adjustable support height of 14.37 to 25 inches, or shifts upright to a 71.06-inch vertical clearance that spans truck cab roofs. Crossbar arms adjust smoothly from 31.49 to 53.50 inches wide via D-shaped security pins to stabilize wide sheet goods. Engineered for standard 2-inch receiver hitches, the setup pack provides a rigid U-bolt hitch tightener to eliminate roadside vibrations, two 118-inch (300 cm) ratchet tie-down straps, striped reflective markings, and a safety flag. A practical transport upgrade for lumber, canoes, drywall, long metal pipes, and extension ladders.
Heavy Duty 750 LBS Load Capacity: Constructed from solid high-gauge structural metal with a rust-preventive industrial finish to transport up to 750 lbs (340 kg) of dense cargo without sagging
2-in-1 Horizontal Bed and Vertical Roof Setup: Configures horizontally to lengthen pickup beds up to 55.7 inches or mounts vertically up to 71.06 inches high for overhead cab loading
Fully Adjustable Width and Clearance Levels: Adjusts conveniently across widths from 31.49 to 53.50 inches and clearance heights between 14.37 and 25 inches using quick-locking D-shaped safety pins
Enhanced Transit Safety with High-Vis Strips: Features bold striped reflective safety stickers across crossbars alongside an 11.8 by 7.87 inch bright warning cloth to alert motorists from afar
Complete Anti-Rattle and Tie-Down Hardware Bundle: Outfitted to fit 2-inch receiver hitches and supplies a heavy U-bolt hitch stabilizer clamp plus two 118-inch (3 m) ratchet straps for zero sway
