GIVIMO 39-in Ceramic Tile Manual Tile Cutter with All-Steel Frame Laser Guide 23 Bearings 4-in Steel Bottom Plate Single Track Rail Sliding Head Adjustable Slide Scale Anti-Skid Rubber Handle and Bonus Spare Cutting Wheel for Porcelain Floor Tile

39.4-in Cutting Length: Full length planks and large format floor tile up to 39.4 in / 1000 mm clear the rail in a single stroke, with a 1.38 in / 35 mm minimum width and a 0.24 to 0.59 in / 6 to 15 mm thickness range

Laser Guide and Slide Scale: Laser positioning drops the cut line onto the tile before scoring starts, and the adjustable slide scale locks in a repeat width so a room full of matching rip cuts runs without marking every piece by hand

Hard Alloy Wheel Plus a Spare: A super hard alloy cutter wheel on the upgraded sliding head produces accurate clean cuttings, and a bonus spare wheel is included free so a dulled edge never turns into a stopped job halfway across a floor

Made for Volume Tile Work: Ceramic, porcelain, ordinary floor and polished tile all fall inside its range, which is why the machine reads as a workshop and industrial site tool rather than something bought for one bathroom

All Steel Frame and Base Plate: An all steel frame carries the cutting action and a 4 in / 10 cm wide steel bottom plate anchors it, giving the long rail something solid to sit on when a full length tile is being scored end to end

Specification: Max Cutting Length: 39.4 in / 1000 mm; Min Cutting Width: 1.38 in / 35 mm; Cutting Thickness Range: 0.24-0.59 in / 6-15 mm; Bottom Plate Material: Steel; Bottom Plate Width: 4 in / 10 cm; Item Weight: 35 lbs / 16 kg

Specification (cont.): Item Dimension: 40.5 x 23.7 x 9.9 in / 102.9 x 60.2 x 25.3 cm; Bearing Amount: 23; Guide Rail: Single Track; Feature: Infrared Laser Positioning; Spare Cutter Wheel: 1 pc; Package Content: 1 Tile Cutter and 1 Accessory Set

Ergonomic Anti Skid Handle: The push handle is wrapped in anti skid rubber and shaped to the hand, and a lifting handle pairs with the roller so a 39 inch machine can still be shifted along a hallway without dragging the rail

Twenty Three Bearings on One Rail: Twenty three bearings carry the sliding head down a single track guide rail, which is what holds a full 39 inch score straight from the first inch to the last with no wander partway across the tile