A rounded bolt head defeats a socket, and that is the exact moment this set earns its place. Twenty-five multi-spline extractors bite into damaged heads that a wrench can only spin on, covering every size from 1/8 in through 7/8 in in 1/32 in steps so the right one is almost always in the case. The spline profile grips harder the more torque is applied, giving the stable biting action that turns a stubborn removal into one attempt rather than five. Steel matters here more than anywhere: these are Cr-Mo at HRC50-55, hard enough to resist the wear, torsion, and deformation that round off a soft extractor on the first seized fastener. The upgraded double-head design connects straight to tools already in the box without an extra sleeve, and two adapters, 1/4 in to 3/8 in and 1/2 in to 3/8 in, open the set up to torque wrenches, electric drills, and whatever else is on the bench. Each extractor carries laser-etched size markings so the right one is picked by reading rather than by guessing. Everything stores in a solid black PP case measuring 9.13 x 5.98 x 2.05 in at 3.9 lbs / 1.77 kg.
Grips Rounded and Broken Heads: Multi-spline extractors bite into rounded, stripped, or broken bolts and screws a socket can only spin against
25 Sizes From 1/8 to 7/8-in: Twenty-five extractors step from 1/8 in to 7/8 in in 1/32 in increments, plus two adapters, for 27 pieces in the case
Cr-Mo Steel at HRC50-55: Chromium-molybdenum steel hardened to HRC50-55 resists the wear, torsion, and deformation that round off a softer extractor
Garage Workshop and Jobsite: The set is built for frequent use in garages, workshops, and job sites where a seized fastener stops the work
Double-Head Direct Connection: An upgraded double-head design connects straight to common tools without an extra sleeve, cutting setup time before the pull
Two Drive Adapters Included: A 1/4 in to 3/8 in adapter and a 1/2 in to 3/8 in adapter open the set to torque wrenches, electric drills, and other drivers
Laser-Etched Size Markings: Clear laser-etched sizes on every extractor mean the right one is read off the case rather than found by trial fitting
Solid Black PP Storage Case: The set stores in a PP case measuring 9.13 x 5.98 x 2.05 in / 232 x 152 x 52 mm at 3.9 lbs, with a place for each piece
Specification: Quantity: 27 Pcs; Material: Cr-Mo Steel; Storage Case Material: PP; Storage Case Color: Black; Net Weight: 3.9 lbs / 1.77 kg; Overall Dimensions: 9.13 x 5.98 x 2.05 in / 232 x 152 x 52 mm
