GIVIMO MDF Router Table with 24-in x 15.7-in Tabletop Multi-Position Adjustable Fence Galvanized Metal Base Clear Chip Guard 2.5-in Dust Collection Port and 12.05-in x 9.02-in Insert Opening for Routers Under 11.2-in x 8.11-in

Galvanized Metal Base Under a 24-in MDF Top: Router work stays steady on a 24 x 15.7 x 1-in MDF tabletop that resists deformation, carried on a galvanized metal base sized to hold a mounted router without flexing under feed pressure

Fence That Moves in Every Direction: Measuring 12.01 x 6.02 x 1 in, the multi-layered fence slides front to back and side to side, letting stock of different widths be positioned exactly before the bit engages for repeatable trimming and shaping passes

Transparent Guard Plus Shop Vacuum Hookup: Flying chips are stopped at the transparent guard while the dust collection port accepts a hose and pulls sawdust off the table during the cut, so debris does not bury the layout lines on the workpiece

Sized for Home Workshops and Small Woodworking Shops: Cutting, trimming, drilling, shaping, and dovetailing all run from one 24 x 15.7 x 20.9-in bench platform, which suits hobby woodworkers and small shops chasing fine craftsmanship in limited space

Smooth MDF Face on a Metal Frame: A full 1-in thick MDF panel gives a flat working surface that wipes clean, and the galvanized metal base underneath keeps the 26.24-lb assembly rigid enough to stay planted through long routing sessions

Specification: Table Size: 24 x 15.7 x 1 in / 610 x 400 x 25 mm; Overall Dimensions: 24 x 15.7 x 20.9 in / 610 x 400 x 530 mm; Net Weight: 26.24 lbs / 11.9 kg; Tabletop Material: MDF; Base Material: Galvanized Metal; Form Factor: Benchtop

Check the Router Footprint First: Routers with a base measuring less than 11.2 x 8.11 in / 284 x 206 mm fit this table, and they mount through an insert opening of 12.05 x 9.02 in / 306 x 229 mm, so measure the tool before ordering

Specification (cont.): Fence Size: 12.01 x 6.02 x 1 in / 305 x 153 x 25 mm; Insert Plate Opening: 12.05 x 9.02 in / 306 x 229 mm; Dust Port Sizes: 2.5 in / 63 mm, 2.7 in / 68.2 mm, 3.04 in / 77.3 mm; Guard: Transparent

Setup Without Special Tooling: Assembly follows the printed instructions and calls for no specialty equipment or prior machining experience, so the base, tabletop, fence, and guard go together and onto a bench in a single short session