Manual vacuuming eats an afternoon and still misses the walls. Hooked to the existing pool pump, this suction-side cleaner works its way across the floor and climbs walls on rubber tires that leave no marks, driven by a gear mechanism quiet enough not to interrupt a conversation poolside. A movable skirt keeps suction strong over uneven surfaces, and a flow regulator tunes pull for dirt, tree seeds, hair, or heavier debris. Twelve hose sections link into a 40-ft run sized for pools up to 20 ft by 40 ft, and the unit handles shotcrete, tile, vinyl, and fiberglass. Plan on a pump of 1.5 HP or 1100 W, and note that stairs and large leaves stay outside its job.
Movable Skirt Suction: a skirt that flexes with the floor keeps the seal on uneven surfaces while the included flow regulator dials suction to match debris size
Quiet Gear-Driven Drive: the gear-driven mechanism runs quietly compared with noisier cleaners and rubber tires improve wall climbing without marking pool surfaces
Pump Requirement and Limits: a pool pump of at least 1.5 HP or 1100 W is needed for proper operation and the cleaner skips stairs and will not pick up large leaves
In-Ground and Above-Ground Pools: runs on shotcrete tile vinyl and fiberglass surfaces in pools measuring up to 20 ft by 40 ft covering both floor and walls
12-Section 40-ft Hose: twelve hose sections join into a 40-ft run with tight leak-resistant joints and soaking both ends in water first makes them easier to connect
Specification: Type: Suction-Side Automatic Pool Cleaner; Applicable Pool Type: In-Ground and Above-Ground; Maximum Pool Size: 20 x 40 ft; Hose: 12 sections at 39.4 in x 1.8 in dia / 1000 x 46 mm each; Total Hose Length: 40 ft; Product Dimensions: 11.8 x 7.9 x 7.9 in / 300 x 200 x 200 mm; Net Weight: 13.7 lb / 6.2 kg; Required Pool Pump: 1.5 HP / 1100 W minimum; Applicable Pool Materials: Shotcrete, Tile, Vinyl, Fiberglass; Wheels: 2
