This 4U rack case carries a standard 19-in equipment stack in an 18.9-in deep ABS shell that clears 18.4 in of internal depth, enough for amplifiers, processors, controllers, and other gear cut to the same rack standard. Both the front and back covers detach, which does two things at once: it opens ventilation through the case while the rack is running, and it gives dual access so wiring, mounting, and adjustments can be reached from either end instead of working blind through one opening. Recessed twist latches hold those covers flush against a sealed body, and the thick ABS shell takes the knocks of storage and transport while reducing dust and light splashes reaching the equipment. Built-in rack rails come with screws and washers, so gear mounts quickly during rehearsals, performances, and temporary setups rather than eating the setup window. A mesh pocket on the door panel keeps cables, manuals, and small accessories with the rack instead of loose in a bag, and the carry handle makes short moves between rooms manageable at 15.65 lb loaded weight.
Fits Standard 19-in Gear: A 4U rack case with 18.9-in outer and 18.4-in internal depth holds amplifiers, processors, and controllers cut to the 19-in rack standard
Rails Screws and Washers: Built-in rack rails ship with the screws and washers needed, so gear mounts fast during rehearsals, performances, and temporary setups
Sealed Against Dust: Recessed twist latches pull the covers flush to a sealed body, which cuts the dust and light splashes that reach mounted gear in transit
Rehearsal and Show Duty: The same DJ mixer rack case travels to rehearsals and performances and handles temporary setups where equipment moves in and back out fast
Thick ABS Protective Shell: A thick ABS body absorbs knocks during storage and transport, giving rack equipment reliable protection without the weight of a road case
Dual Access Front and Back: Detachable front and back covers open both ends, so wiring, mounting, and adjustments happen from either side instead of through one opening
Ventilates While Running: Taking the covers off improves ventilation through the case during use, letting the mounted gear breathe rather than sit in a closed box
Mesh Pocket and Handle: A door panel mesh pocket holds cables, manuals, and small accessories, and the carry handle makes short moves between rooms straightforward
Specification: Material: ABS; Depth: 18.9 in / 480 mm; Detachable Parts: Yes