Black PVC slat wall paneling turns a blank garage wall into adjustable storage, with 3-in slots running the full 2-ft by 4-ft face. Hooks, baskets, and brackets drop into any slot and move again whenever the tool collection changes, and one panel is rated to hold up to 300-lb. Thick solid PVC forms the entire board, coupling ribs included, so panels join edge to edge into a longer run and can be cut down to fit an awkward bay. Installation is direct: mark the layout, drill the holes, drive the screws, then press the panel onto them. Workshops, garden walls, and retail display walls all take the same system.
300-lb Panel Load Capacity: Each 2-ft by 4-ft panel carries up to 300-lb of hammers drills ladders and other shop gear spread across its slotted face
Thick Solid PVC Panel: Thick solid PVC makes up the whole board including the coupling ribs so hooks and brackets seat firmly in every slot instead of working loose
3-in Slot Width: Standard 3-in slot spacing across the 8-sq ft face accepts hooks baskets and brackets that reposition anywhere along the run in seconds
Coupling and Trim to Fit: A coupling structure joins panels edge to edge and the PVC cuts cleanly so a wall run can be sized to an odd bay or a short stud span
Mark Drill Press On: Layout marks go on the wall then screws set into drilled holes and the panel presses onto those fasteners to lock the storage run in place
Specification: Panel Size: 2 x 4-ft; Coverage: 8-sq ft; Material: PVC; Color: Black; Slot Width: 3-in; Load Capacity: 300-lb / 136-kg per panel; Thickness: 20-mm; Weight: 11.02-lb / 5-kg