Maximize your diagnostic capabilities with the FNIRSI DSO-TC4 3-in-1 handheld instrument, combining a 10 MHz bandwidth, 48 MSa/s sampling rate oscilloscope with transistor tester and DDS signal generator. Oscilloscope captures and analyzes signals with max voltage 400V and vertical sensitivity 10 mV/div–10 V/div, supporting waveform image storage and export. Transistor tester automatically identifies pins and parameters for diodes, triodes, MOSFETs, capacitors, resistors, and more, with NEC IR decoding for remote control device debugging. Built-in DDS signal generator outputs 13 waveforms from 0–50 kHz with adjustable 3V output for signal simulation. The 2.8-inch HD TFT screen offers adjustable brightness, powered by 1500 mAh lithium battery with auto shutdown (15/30/60 mins). Rich functions include voltage measurement, continuity test, DS18B20 temperature sensor, DHT11 sensor, and automatic calibration.
This 3-in-1 handheld instrument combines a 10 MHz bandwidth, 48 MSa/s sampling rate oscilloscope with transistor tester and DDS signal generator for comprehensive diagnostics.
Oscilloscope captures signals up to 400V with 10 mV/div–10 V/div sensitivity, supporting waveform image storage and export for analysis.
Transistor tester automatically identifies pins and parameters for diodes, triodes, MOSFETs, capacitors, resistors, and supports NEC IR decoding for remote control repairs.
Built-in DDS signal generator outputs 13 waveforms from 0–50 kHz with adjustable 3V output for versatile signal simulation.
Features 2.8-inch HD TFT screen, 1500 mAh battery with auto shutdown, plus voltage measurement, continuity test, and temperature sensor support.