EasyHeat AHB 6-ft 42 -Watt Pipe heat cable

AHB cables keep water flowing through plastic or metal pipes at ambient temperatures down to -40°F (-40°C)

The cables come pre-assembled and ready to install right out of the box

The AHB's bright power indicator light lets you know it’s working at a glance

The built-in, energy-saving thermostat automatically keeps the pipe at just the right temperature

Keep your water pipes flowing for only nickels per day…the energy-efficient AHB cables only consume 7 watts per foot of cable

For use on plastic or metal water-filled supply pipes at least three feet in length and up to 1-1/2 inches in diameter only

The circuit supplying the AHB cable must have ground fault circuit interrupter (GFCI) protection.

Be sure to follow all the installation instructions supplied with the cable and to make sure the installation complies with all national and local electrical codes

Additional installation supplies: scissors, tape measure, file to remove burrs, marking pencil, eye protection, HCA application tape or similar electrical tape, and 1/2-inch wide fiberglass or equivalent non-flammable pipe insulation with vapor seal