The Dremel 111 engraving cutter is a single-flute, high speed steel bit designed for precise material removal and fine-detail work. Its cylinder shape enables deep cuts, flat-bottom slots, rounded edges, stop cuts and V-cuts; the accessory tip also produces flat side cuts and V-cuts when held at 45 degrees. Use it on wood, fiberglass, ceramics, plastic, jewelry and soft metals with rotary tools that accept a 1/8-in (3.2 mm) shank. Key specs: working diameter 1/32-in (0.8 mm), shank 1/8-in (3.2 mm), cutting edge length 0.7008 in, overall diameter 0.7874 in, single flute for fine control.
Precision engraving cutter from Dremel for detailed shaping, carving and inlay work.
Ideal for detailed material removal including shaping, carving, engraving, hollowing, grooving, slotting, inlaying, tapered holes and freehand routing.
Compatible with a variety of materials such as wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Cylinder shape allows deep removal of material, flat-area cuts, rounded edges, stop cuts and V-cuts.
Accessory tip creates flat-bottom slots and grooves, flat side cuts, and V-cuts when held at a 45 degree angle.
Working diameter: 1/32-in (0.8 mm); shank: 1/8-in (3.2 mm); material: high speed steel; single flute for detailed control.
Designed for use with rotary tools that accommodate a 1/8-in shank size.
Cutting edge length 0.7008 in and overall diameter 0.7874 in for controlled depth and accessibility in tight areas.
Versatile and easy to use, this engraving bit delivers consistent results for hobbyists and craftsmen working on fine-detail projects.
