Clorox Pool&Spa 4-lb Stabilizer Pool Balancer

Test results

Results of this product differ significantly from other test strips as well as pool store water test results It difficult to understand which test procedure is correct

Takes forever to dissolve

takes forever to dissolve. test results show that i need to put in 8 lbs. i would be brushing all night long if i did that.

Don’t waste your money

This does not dissolve. I’ve tried the nylon sock trick, tried dissolving it in boiling water. I’ve had some sitting in room temp for over a week now just to see if it dissolves over time. It.does.not.dissolve

Dispensing hint!

This product works just fine. Like others have said, it will take a few days to register on the test, do not add more the next day thinking that it is not working. It takes time! Also if you use the Clorox app and have all of your pool info entered, it will tell you how much product you will need to use. As for the dispensing &;dissolving of the stabilizer, a little trick I learned is to cut the leg off of an old stocking or pantyhose and fill it with the stabilizer, then tie it to the ladder or...

Stability

Reading other reviews I gathered that this product was difficult to dissolve for some. I had an extra tablet float so I put a large dose in the floater and opened it about halfway. When I tested the water the next day the level had risen from almost zero to perfect level. So far the product reading has been even for the last week. The product has been slowly desolving in the float. I take the float out when we swim only. It has done ok with the clorine compared to before when it was depleted in ...

Nothing but issues

I added 1/2 of why it said to our above ground pool. It still isn’t registering that it has any and for a week the Chlorine read as high afterwards and I couldn’t get it down!