Centipede 48-in W x 30-in H Silver Plastic Work Bench

Good for perfect situations

I tried using this a few times and could not get it sturdy enough. I had to trim doors for one attempt and the other time I was painting a piece of furniture. Each time it was very wobbly. I found that you have to have a perfect level floor to set this on it can be more stable. A garage floor is not level so if you are getting this for your garage, check your floor levelness first. Also a deck is not good for this either, deck boards are not perfect enough for this to sit on. If this item ha...

Not Perfect But Close

I purchased both the 2X4 and 4X8 work supports about six months ago. By and large I've found these work supports to be very versatile. They really do lend themselves to improving work flow and comfort whether on the job site or in the shop. I only have one complaint. One of the advertised incentives for purchasing these work supports is how easy they are to deploy and then fold again for storage. These supports are very easy to position and set up but when it comes time to collapse them again fo...

Very good product

I bought this product to cut and use for full sheets of plywood and OSB. It does the job extremely well. It does a very good job for supporting the wood and it does a very good job conforming to less than even ground surface. My main concern is that it will not support the stated load if it is on a less than completely flat or level surface. Together on an even and sturdy surface to system is very strong. However, the load is very different when using it for different sized wood or drywall.

LIking It

Just purchased this product and used it for the first time today. Easy to set up, just put it down and pull on one end and out it goes. I was cutting OSB and the support on the panel was outstanding. Way easier than setting up 2 or 3 sawhorses. It has 15 support pads, so it easy to cut between them, and your lumber still has plenty of support. Love it.

Verg cool product

Been using this for the last few weeks since I bought it. I set it up in the driveway and put a sheet of 3/8 plywood on it and use it as a staging bench. I am siding my house and I have been staging the tools such as nail guns, drills, saws etc at the beginning of the day so I know where they are. Has 101 uses that I can come up with real quick. A little pricey for what it is but I would probably spend the money again for one.

Makes panel cutting one man job

Kids are gone, wife in flower garden.....how does a man cut 4X8 panels without dragging out multiple saw horses? Answer.....using this portable work system. Easy to lay panel on, mark and cut without asking someone to help support piece without letting it fall and split. I recommend this especially for those who usually work alone. waited for price to come down and then added to my "tool collection".

This is an easy way to provide ample work space at

We always have wonderful salespeople to help us locate products and advise us about proper products for the projects we are planning.

You have to see this in action, I bought both

So after a ten year hiatus from woodworking I recently dove back in starting off with making a chest and updated almost all of my tools in the process. I've never had nor needed a sawhorse until now and went and bought two traditional sawhorses for my project. For me they weren't very helpful when it came to cutting down an 8x4 3/4 inch plywood, in fact I only used the sawhorses to cut down some 2x4's and that was it. For me it was a waste. For the 8x4 3/4 inch plywood I had bought 3/4 inch foam...