Display powered products from changing angles with this 19.7-inch/50cm motorized rotating stand. Its 360-degree rotating platform is designed for product displays, exhibition presentations, photography and live streaming, including demonstrations of lamps, Christmas trees and other electrically operated products. The outlet on the rotating surface lets a displayed item remain powered during rotation, while the stand's structural design prevents power cord twisting and tangling.
Use the remote control to adjust speed, change between clockwise and counterclockwise rotation, or start and stop movement during a presentation. These controls allow display-angle changes during live demonstrations without operating the controls on the platform itself. The built-in outlet also has an independent power switch, allowing you to control power to the displayed device without unplugging it. Its maximum output is 500W, and it accepts North American NEMA, European EU and British BS plugs.
The supplied cord connects to a US household outlet through its NEMA 5-15P plug and to the turntable through its IEC 320 C5 connector. This connection supplies power to both the rotating platform and its surface outlet. Switches and cable ports are positioned out of the front view, helping keep those connections from distracting from the displayed product in photographs and live video.
A high-torque brushless motor drives the platform, with a maximum supported load of 400 lbs; for long-term use, the recommended load is below 150 lbs. The product weighs 11 pounds, and its listed product dimensions are 22 x 21 x 4 inches. Package weight is 14.1 pounds, with package dimensions of 22 x 21 x 4 inches.
The high-torque brushless motor supports a maximum load of 400 lbs, while the recommended load for long-term use is below 150 lbs
The rotating surface includes a built-in AC outlet with a maximum output of 500W that accepts North American NEMA, European EU and British BS plugs
Remote control functions let you adjust rotation speed, select clockwise or counterclockwise movement and start or stop the platform during a display
The rotating stand is designed to prevent power cord twisting and tangling when displaying Christmas trees, lamps or other products that need continuous power
The included power cord has a NEMA 5-15P plug for US outlets and an IEC 320 C5 connector that connects to the stand to power both the platform and its outlet
Switches and cable ports are concealed from the front view to keep them out of product photos and live videos for a cleaner display presentation