Bosch Right angle drill attachment
Item #2675379 |
Model #RHA-50
Here are some similar items...
90 degree angled attachment for Bosch SDS-plus® hammers allows for drilling in concrete in hard to reach places
Attachment can be rotated 360 degrees on the tool to obtain the correct working position
Provides convenience with a small reduction of tool impact strength
Fits most newer Bosch corded SDS-plus® rotary hammers: 11253VSR, 11255VSR, RH228VC, RH328VC and cordless models 11536-C and 11536 VSR
Does not fit Bosch models 11250VSR, RH328VCQ, RH432VCQ
General | |||
|---|---|---|---|
Sub-Brand | N/A | Package Quantity | 1 |
Type | Right angle drill attachment | ||
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | No | ||
Warranty | |||
|---|---|---|---|
Warranty | None | ||
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 27112800 | ||
Check out the Best Selling Drill Parts & Attachments on Lowes.com
Ratings may include incentivized customer reviews.
Not like the good Ole days...
when tools can be used for generations or a lifetime or a few uses. i bought 8 of these. they ALL overheated and fell apart.
From boschtools.com
What A Bummer
Tried drilling 3/8” holes above ductwork we had in our way and the hammer setting never worked. We were unable to drill any holes. We tried tightening the head of it and that didn’t help any. I had multiple guy’s try it to make sure it wasn’t the strength of the first guy that was the problem and not one guy was able to drill a hole. This is in a hospital so being OSHPD we can’t just drill our holes any, they have to be where they have to be. It cost me an inspection as well as added time to my ...
From boschtools.com
Thank you for your feedback and review. We apologize for the inconvenience that this may caused you. The RHA-50 is an SDS-plus Right Angle Attachment....
Horrible design
Do not buy this product, it is a waste of time and money both when you buy it and when you're on the job site using it. It has the worst design, this attachment literally just slips over The cone of the rotor hammer And it has no locking system to keep the 90 angle drill on the gun. Even by tightening down The Allen bolt it's still slips Off. No matter how much you tighten the Allen bolt the hammer action of the rotor hammer Pushes the attachment off one way or another. It's a very poor design ...
From boschtools.com
Thank you for your feedback and review. We apologize for the inconvenience that this may caused you. The RHA-50 is an SDS-plus Right Angle Attachment....
Just what I needed
Works great for drilling 7/16” x 4” holes for Hilti packets. Only gripe is red plastic bushings are easy to lose and hard to replace.
From boschtools.com
So dissapointed
Very disappointed and let down ! For the money I spent out on this piece of equipment it only managed to get done a few drill holes in an awkward position before completely over heating and dying . Not what I exspected from Bosch you usually have such high standard . I feel I've been completely ripped off !!
From boschtools.com
Thank you for your feedback and review. We apologize for the inconvenience that this may caused you. The RHA-50 is an SDS-plus Right Angle Attachment....
Burnt up!
Used this to drill 3/4" holes that were only 4" deep. Attachment got crazy hot and the grease inside of it started running out of it. Only drilled 4 holes and it was hot before we even finished the 1st hole. To bad we would have had many uses for this and wAntes to purchase more of them.
From boschtools.com
We are sorry to hear about the issue you had with the right angle attachment. Thank you for bringing this issue to our attention. Your satisfication w...
0 Questions
Be the first to ask a question
Bosch: Featured Videos
COMPARE PRODUCTS
Name | Current Item ![]() BoschRight angle drill attachment | ||
|---|---|---|---|
Ratings | |||
Package Quantity | 1 | ||
CA Residents: Prop 65 Warning(s) | |||
UNSPSC | 27112800 | ||
1 | 1 | ||
27112800 | 27112800 |
FEATURED PRODUCTS
Sponsored









































































We apologize for the experience you've had with the RHA-50. Please contact us so that we may further discuss the issue and available options for this ...