Complete low-voltage runs with this 200 ft 22-gauge, 8-conductor shielded wire from Aoibox. Stranded conductors help routing through walls, bends, and tight pathways, while the white CL3P plenum jacket is suited for installs that require a plenum-rated cable above drop ceilings and along air-handling routes. Use it for security, alarm, access control, and sound connections where a multi-conductor shielded cable can serve a panel, keypad, or speaker homerun. The 200 ft length supports larger jobs and several smaller connections from the same reel so pulls stay continuous with fewer splices, and the white jacket blends into interior trim when a short stretch stays visible.
Designed for security, alarm, access control, and sound wiring projects that call for a 22 gauge 8 conductor shielded cable so you can pull one jacketed run to a panel, keypad, or speaker instead of mixing several thinner cables
Stranded conductors help the cable route more easily through walls, bends, and tight pathways during installation so you can work around corners, studs, and plenum spaces without fighting stiff solid cores on a long 200 ft pull
The white CL3P plenum jacket is suited for low-voltage installs where a plenum-rated cable is required by the application so you can dress runs above drop ceilings and along air-handling pathways with a jacket chosen for that kind of route
A 200 ft total length provides a continuous run for larger jobs or multiple smaller connections from the same cable so a single reel can cover a long hallway of devices or several rooms without adding extra splices in the middle of a long pull
Shielding helps support cleaner signal transmission in low-voltage systems by helping reduce unwanted interference when alarm, access, or sound cables share a route with other building wiring that can couple noise into the conductors along the path
The white jacket blends neatly into interior spaces and helps create a tidy finished look for exposed runs along trim, closets, or equipment rooms where a bright jacket would stand out against painted walls after the devices are mounted in place