Anqtovp 50-piece push-in lever wire connector set provides compact inline terminals for wire splicing projects. The connectors use a 2-wire splice configuration with a 2 in 2 out design and are specified for wires from 0.1 to 4 mm², also identified as 28-12 AWG. They can be used with solid, stranded and flexible wires for decorative wiring and electrical projects such as ceiling lights, spotlights, LED strip lights, power supplies, electrical boxes and loudspeakers. The housing is made of PC insulation material, and the internal design uses thickened copper conductor strips for better tightness and conductivity. The listed material characteristics include corrosion resistance, high temperature resistance, aging resistance and long service life. Each connector uses a small lever to simplify wire insertion and removal. Pull the lever to 90 degrees, peel off about 0.4 inches of the wire coating, insert the wire into the wiring hole to the end and press the lever. The lever connector is reusable, allowing the wire to be detached or reconnected many times easily. Its compact design helps save space and supports separate management of different wires without twists between them. Test holes on the back of the connector allow you to check whether a wire is carrying power, which facilitates quick troubleshooting of circuit problems. The set contains 50 pieces. The listed product weight is 13.4 ounces, and the listed product dimensions are 1.5 by 0.57 by 0.53 inches. For package reference, the listed package weight is 0.15 pounds and the package dimensions are 8 by 4.8 by 2 inches. These package measurements are separate from the listed product measurements.
Includes 50 push-in lever wire connectors configured as 2-wire splice terminals with a 2 in 2 out design for organizing separate wires during electrical projects and wire splicing
Thickened copper conductor strips support tight connections and conductivity, while the housing uses PC insulation material with corrosion resistance, high temperature resistance and aging resistance
Reusable lever connectors allow wires to be detached or reconnected many times, and the compact design helps save space while keeping different wires separately managed without twists
To install, pull the small lever to 90 degrees, strip about 0.4 inches of wire coating, insert the wire to the end of the wiring hole and press the lever closed
Compatible with solid, stranded and flexible wires from 0.1 to 4 mm² or 28-12 AWG for decorative wiring and electrical projects including ceiling lights, spotlights and LED strips
Test holes on the back provide a place to check whether a wire is carrying power, helping with quick circuit troubleshooting; listed product dimensions are 1.5 by 0.57 by 0.53 inches