Adamax 3/8-in Straight Strut Nut

Our Strut Channel Spring Nut uses a spring to slide and secure the nut, so you don't need an extra hand to hold it in place. You can work faster while you're busy tightening down parts and other fastener hardware. It works exceedingly well with struts and other fixtures. It's also a secure way of holding fixtures in place when working with 1-5/8-inch channels. Our advanced hardware innovations bring you strut channel nuts that are highly resistant to pull-out and sideslip in excess of the full strength of the channels with which they are used. The unique design develops a wedging action that increases with pressure or load. You get reliable fittings that support the structural integrity of your channel setup. Our threaded hardware is electro-galvanized for excellent corrosion resistance. You get reliable anti-rust protection even in areas exposed to weather. You also get superior paint based on your hardware nuts. Together, these features allow your spring nuts to cut down on your work time while maintaining solid installation and safe, load-bearing construction. Save valuable hours on assembly and retrofit applications while adjusting fittings to precise distances. Our electrical hardware can be used with A-series and C-series steel channels in conjunction with hex head cap screws to create a unique, weldless fastening solution. All our threaded products are American Standard thread, free fit class 2, and are UL-certified with a 2-year warranty.