Crescent Crescent Fiber Cement Circular Saw Blade Bundle with 25-ft Tape Measure

A very good saw blade

This diamond teeth saw blade did a great job cutting the cement fiber board, like a hot knife through butter. I could not find it at any of the other Lowes store, but found it at the San Clemente store, at a big discount off the regular retail price. My guess is that it was being cleared out, so all the other stores sold out, and this was the only store the only one that still had some. So I got lucky finding it here.

Don't risk your project on the wrong blade!

This Cresent fibre-cement cutting blade performed perfectly for me, and it's really a necessity if you're cutting these types of materials. So, 4 teeth on a saw blade? Yes! You actually want it this way, as each type of blade serves a different purpose, and really makes a big difference. For example, The 100 teeth basic thin sheet metal blade: This is meant to rip apart very thin materials (vinyl siding, for example) where there is very little material to remove, and you just need to tea...

An impressive cutter when mounted properly

BACKGROUND: I will be working with Hardie board in the future. The chance to get the Crescent Polycrystalline Diamond Cement saw blade was too good to pass up. FIT AND FINISH: This is my first Crescent saw blade. It appears equally well made compared to similar blades in its price range. FEATURES: From the store product page, with my comments as appropriate. • 75X BLADE LIFE - Premium Polycrystalline Diamond Teeth (PCD) o PCD is a new tool item for me, so I did some research and found the fo...

Got the Job Done

This is an overall good blade for relatively small projects, IMO. It cut through the first four (1/2in thick) 3x5ft concrete boards with relative ease. Made WAY less dust than a diamond bladed grinder I was using to take care of tight corners, despite the diamond grinder blade being what I consider to be the jack of all trades for natural stone, brick, concrete, concrete board, pavers, and other heavy duty masonry materials. In terms of longevity though, this is where I'm a bit worried about ...

Awesome Cement board Blade

[This review was collected as part of a promotion.] I've used plenty of cement board blades for the past 15 plus years, I was almost certain I already tried this blade, before there all the same, but once I received the product to use, I'd realized I've never used the Crescent Brand Blades before because I've never seen them in store. So for me to see this blade available and also at 7 1/4 size I was excited to try it out. The sharpness lasts, no waivering while blade is even on a either Tile Sa...

great product

Holds up to Diablo PCD Hardieblade

[This review was collected as part of a promotion.] This is a review for the Crescent Fiber Cement csbfc-704 4 tooth polycrystalline diamond 7-1/4 saw blade. It is my understanding that this blade is specifically designed for long life cutting of cementitous siding and tile backerboard. My review is a direct comparison the Diablo HardieBlade D0704DH PCD diamond 4 tooth saw blade of the same size and dimensions when cutting James Hardie siding. This review compares cut quality and ease of use bet...

Smooth, fast cuts in fiber cement products

thickness than ones that are used for wood which helps keep down the dust issue. NOTE: This blade is NOT designed for cutting concrete, cinderblocks, or paving stones. This is designed for fiber cement cutting only. The blade is well balanced and creates a smooth and fast cut. I’ve used cheaper blades that end up chipping the siding, especially when working with older planks. The Crescent company has been around since 1907 and has a good history of quality tools. I built a 10x12 shed a...

Great blade

[This review was collected as part of a promotion.] This is definitely a specialty type blade that has specific uses in mind. That being said, for cutting any type of cement board or similar products, you will need a blade like this. Anyone who has done it much will tell you that smooth, accurate cuts are king. This blade definitely makes the cut (pun intended!) In terms of cleanliness. The narrow profile of the blade helps it to perform exactly as advertised. The blade produces surprisingly lit...