can i use this to fill holes in a fieldstone foundation?
5
I believe this product would be ideal for such a project.
Was this Answer Helpful ?Yes but not recommended due to the fact that the more modern cements in Sakrete have a much stronger bond that the old mortar used in the wall (it's stronger) and may pull the wall apart adjacent to the patch as time passes.
Was this Answer Helpful ?QUIKRETE Fast Setting Concrete Mix may be used to replace concrete that is at least 2 inches thick. It achieves a typical compressive strength of 4000 PSI in 28 days. If there are holes to be filled in to replace existing mortar which has eroded, QUIKRETE Pro Finish Mason Mix, which is an ASTM C 270 Type S mortar, could be used. Be sure to check building codes to ensure that all requirements are being met. If neither of these scenarios describes your circumstances, please contact the QUIKRETE Technical Center at 1-800-282-5828 for assistance in determining an appropriate material to make your repairs.
Was this Answer Helpful ?If you are repair it use morter mix's to fix it ask any Lowe s staff for help and get the right stuff they make it easy fix for you
Was this Answer Helpful ?Quikrete Fast Setting Concrete Mix is designed to be used for setting anchors, sleeves and posts, and pouring slabes of 2 inches or thicker, and for other applications where a fast-setting mix is required, so it should work find for your porch section.
Was this Answer Helpful ?