can it be used in my driveway

QUIKRETE® Fast Setting Concrete Mix may be used for making repairs within an unsealed / uncoated concrete driveway, provided the repairs require a depth of at least two inches thick. The Fast Setting Concrete Mix should be blended with water before making the repair. The area being patched should be properly prepared, removing any dust, dirt, oil, grease, wax, unsound concrete, paint and other foreign materials. A painted on layer of QUIKRETE® Concrete Bonding Adhesive is recommended for increased bond. When making repairs, we always recommend trialing a small quantity of the repair material in a discrete area, and allowing it to cure for a minimum of 24 hours to determine whether the color and overall appearance is acceptable before using the material in less discrete areas. Please call the QUIKRETE® Technical Center at 1-800-282-5828 if you have any questions.

Yes, this product can be used on a driveway.

This product sets very quickly (20 - 40 minutes). Are you repairing a hole in the driveway or placing a new driveway? The working life is too short to attempt a large project. You can use this for posts, small sidewalk sections, placing a step or two...but, large areas will set-up too quickly to allow you to screed, float and finish the job.