FREE SHIPPING ON QUALIFYING ORDERS $49 OR MORE
Whether you prefer cooking with charcoal or gas, one thing remains the same — cleaning and maintenance are essential for great grilling.
To you it may be a grill or a barbeque or even a bbq, but whatever you call it, a wire brush or grill stones, rags or paper towels, cooking oil and some cleaning supplies are all you'll need to make sure it's safe and running great every time you fire it up.
Check the flame tamers. These directly cover the burners and are also called heat tents and vaporizer bars. Brush off debris with a wire brush. Do not put oil on flame tamers after cleaning.
Tube, u-shape, flat and cast burners should be checked when flame tamers are removed. Clogged burners can lead to uneven cooking and premature burner failure. Scrub burners with a dry wire brush, giving attention to the burner port area (the jets where the gas comes out) to remove any food residue or grease.
Infrared and rotisserie burners are a little different. Ceramic burners are delicate and need to be cleaned carefully. Turn ceramic burners on for 10 minutes to burn off excess grease and food debris. With the burner off, use tweezers to remove any large food debris.
Routine brushing of the cooking grates with a dry wire brush or grill stone prevents food and bacteria buildup. Make sure the brush or stone is appropriate for the grates.
Check your grill brush to make sure that the bristles are in good condition and are not coming out. After using the brush, make sure your cooking surface is free of bristles.
Before you start your gas grill, take a moment to inspect the fuel line for cracks. Monthly, perform a more thorough inspection. Brush soapy water along the connections. If bubbles form when the gas is running, tighten your connections or replace the line.
Clean the venturi tubes. Venturies are the tubes that mix air and gas and feed to the burners. They need to be clear to work properly. The tubes make good homes for spiders and insects during the off-season. Even a small blockage can become a fire hazard. Remove the entire burner/tube assembly and clean with soapy water. Clean the holes with a wire brush, paper clip or small piece of wire. Replace when dry and ensure the venturi tube is properly aligned with the gas valve.
Make sure the venturi is in place either by sight or with your fingers. Not having the venturi tube placed over the gas valve can be dangerous if the grill is lit.
Check propane levels on the gauge atop the tank. If you don’t have a gauge, pour warm water down the side of the tank and follow it with your hand. The place where the water temperature starts to feel cold is your fuel level.
Check the ignition system for a spark. No spark? Check that the pressure regulators are tight on the tank and you can try manual ignition using a grill lighter and maintaining a safe distance from the flame. If that works, check the batteries in your ignition switch and clean or replace the electrodes. Your owner’s manual will show you how.
Read and keep your instruction manual and warranty. The instruction manual will explain how to order replacement parts.
Grill surfaces are made out of different materials and require different cleaning methods.
Follow the grill manufacturer's instructions for use, cleaning and maintenance.