Any type of exterior gets dingy over time, but a pressure washer can quickly restore your home to its former beauty. Learn the steps for pressure washing or power washing brick, siding and stucco exteriors.
Product costs, availability and item numbers may vary online or by market.
Missing anything? Shop Online
Different pressure washers have different cleaning abilities. Read the documentation that came with your machine before beginning pressure washing or power washing and confirm that your model is appropriate for the job. Learn how to set up your machine and how to select the correct spray pattern. Settings vary by whether you're applying detergent or performing high-pressure cleaning and by the type of surface you're cleaning.
In addition to preparing the pressure washer, get the work area ready. Remove obstacles that could cause you to trip or that might snag the hoses. Turn off power to external electrical outlets and fixtures and tape down plastic to cover them. Trim back plants that touch the home exterior and then wet and cover all of the plants in the work area. Close nearby windows and doors.
If you have a two-story home, consider investing in accessories such as spray tips and extensions that are designed to help you clean second stories.
Follow the safety instructions in your pressure washer manual. General guidelines include:
Don't pressure wash your home if you think it's been painted with lead paint. Typically, these are homes painted before 1978. If you think your home might have been painted with lead-based paint, you can purchase a test kit or contact a professional for an inspection and recommendations.
General cleaning tips are listed below. Always follow the instructions that came with your pressure washer. Using a pressure washer incorrectly can damage a home exterior, so check the manual to find information on spray settings and how far the spray tip should be from the surface you're cleaning. Test the high-pressure spray on an inconspicuous area before cleaning to make sure the setting does not damage the exterior surface.
Cleaning tough stains and grime that build up on your home exterior may require a detergent:
Keep the high-pressure spray away from windows and exterior vents.
Regardless of the type of exterior you're cleaning, avoid getting detergent or water behind the outer surface. Here is more information on pressure washing some common exteriors:
Brick and Mortar
Patch damaged joints and allow the patches to dry for at least a week before you clean the brick. Saturate the brick with water using a gentle, low-pressure spray before you apply detergent. This will help keep the detergent from soaking into the brick. Stand away from the surface and work upward with the spray. After you've finished cleaning and the brick has dried, you may see a powdery, white substance known as efflorescence — a residue of salts that moisture draws out of the brick. Scrub off efflorescence with a dry wire brush. If residue remains, use water and a soft-bristle brush to remove it.
Repair or replace damaged siding before pressure washing. Keep the spray away from gaps, such as those around door and window trim. If the siding panels overlap, work across the topmost panel to the one it overlays. Avoid spraying under the bottom edges of the panels.
Patch chips and cracks in the surface and let the patches dry for a least a week before pressure washing. To protect the texture when you clean the stucco, hold the spray gun or wand so that the spray hits the stucco at a 45-degree angle. Keep the nozzle at least 24 inches from the surface. If you notice copper or rust stains, clean them using a soft brush and a rust-removal solution. Clean off the solution with a garden hose and clear water.
When using a cleaning chemical, follow the manufacturer's instructions.
Your gutters may also need cleaning. Set your pressure washer for a high-pressure spray pattern. Rinse the surfaces with clear water to reduce the spots and streaks caused by water, detergent and grime splashing from other areas of the house.
When cleaning overhead, point the spray ahead of you and to one side to avoid spray-back and drips.
After you clean your home exterior, flush the area around the house with clear water to dilute the detergent residue. You'll also need to take care of the pressure washer. Your manual should include directions for relieving the water pressure, draining liquid from the pump and storing the machine. Follow these instructions to make sure your pressure washer is ready for your next cleaning project.