H2OPRO Water Pump Accessories

Zoeller   Plastic Check valve

Count on Zoeller® Pumps to deliver the very best solutions as the leading brand for pumps and pump accessories. Since 1939, this commitment to top quality offers you years of service and durability provided by a family owned company with product made in the USA.Standard check valves may produce a slamming sound when the water flow reverses in the discharge pipe after a pump stops. This is commonly referred to as water hammer. If you’d like to reduce water hammer, the Quiet Check Valve is a perfect solution. Like any good check valve, it also protects your pump by providing reliable backflow prevention.This quiet check valve offers the features provided in a standard check value with the addition of a hinged, spring-loaded flapper. This mechanism makes the flapper fully close against the fluid flow as the pump shuts down. Rapid closure against pressure before any flow reversal can occur eliminates the noise caused by hydraulic shock.Designed for full flow with a clog-resistant design, it can be installed in a vertical or horizontal orientation. The solvent-weld ends with unions on the quiet check valve make it easy to install. Additionally, the union on either end simplifies pump removal when it becomes necessary.

H2OPRO   2-in X 36-in Steel Well Point

This 36-in long, 2-in stainless steel well point drives into all types of soil. Engineered to provide an ideal combination of easy driving, effective sand control, corrosion resistance and strength. There is also a three-step bonding design which prevents the screen from peeling back.

DuroMax   DuroMax 2" X 25' Pin Lug Fittings PVC Lay Flat Water Pump Discharge Hose

This 2 in. x 25 ft. PVC discharge hose is lightweight, rugged, flexible and reinforced for heavy duty service. Designed for water discharged in industrial and construction applications. Reinforcement spiral plies and longitudinal synthetic cords for burst resistance.

Sump Alarm   Indoor/Outdoor, Sump Pump High Water Alarm, 120V,10 Foot Float,

This Industry leading Indoor and Outdoor 120 V High-Water Alarm Indicates Visually and Audibly When Liquid Level is too High (90db horn). It Can be Used in Sump Pumps, Water Tanks, Lift Stations, Low Density Oils and Sewage Water. Product Activates When the Water Level in the Basin or Sump Rises Above the Desired level. The large (1 inch) LED Indicator Light is Visible from a Distance.This Product Comes with a 6 Ft. 3 Prong Grounded Plug and a 10 Ft. Tethered Water Boss Float. The Operating Temperatures for this Product are -40 deg F to 140°F. Product is Ready to Operate out of the Box, Including Four Rear Mounting Holes, Mounting Feet, Wall Anchors, Hardware, and Wire Ties to Simplify Installation.

Zoeller   2-inch Full Flow Unicheck Plastic Check Valve for Sewage and Effluent Pumps

Count on Zoeller® Pumps to deliver the very best solutions as the leading brand for pumps and pump accessories. Since 1939, this commitment to top quality offers you years of service and durability provided by a family owned company with product made in the USA. Our standard 2-inch unicheck plastic check valve is designed for sewage and effluent pump applications. The rubber coupling with stainless steel clamps on each side of the check valve allow for quick and easy connection to SCH40 PVC. It can be spliced into an existing line very easily as well. It is also designed to be used in either a vertical or horizontal orientation.

Zoeller   Plastic Alarm

Count on Zoeller® Pumps to deliver the very best solutions as the leading brand for pumps and pump accessories. Since 1939, this commitment to top quality offers you years of service and durability provided by a family owned company with product made in the USA.

Level Sense   Level Sense 15 Feet Water Level Float Switch with Mounting Brackets#8230

Sump Pump Discharge Pipe Clamp on float switch with mounting bracket and 15 foot wire. Attaches to the discharge pipe of a sump pump to give a high level alarm works with Level Sense and most household security alarm systems.

Superior Pump   Thermoplastic Alarm

Superior Pump model 92060, remote alarm system, monitors liquid levels in sump and sewage basins, holding tanks, and other applications. UL listed and CSA certified.

Zoeller   Plastic Kit

Count on Zoeller® Pumps to deliver the very best solutions as the leading brand for pumps and pump accessories. Since 1939, this commitment to top quality offers you years of service and durability provided by a family-owned company with product made in the USA.

SludgeBoss   Sewage/Septic Wire Lead Float Switch, 16 Foot Length, Rated up to 13 Amps, Designed for Heavy Solids

This Sewage Float Switch and Septic Float Provide Reliable Measurement and Control of Wastewater Levels for Both Empty and Fill Applications. With its 16 Foot Cord and Self-Orienting Design Non-Tethered to Accommodate an Array of Needs, This Float Switch is Ideal for Medium to Heavy Amounts of Suspended Solids Designed for Sewage and Septic Applications. The SludgeBoss Float Switch is Controlled by a Honeywell Micro Switch and is Rated for Use with 12-24VDC and 120-240VAC. Directly Control Motors of up to ½ Horsepower (or 13 Amps) at 120- or 220-Volts AC for Non-Continuous Pump Operations, and up to 13 Amps for 12V DC Motor Loads. With a Corrosion Resistant Polypropylene Casing and Temperature Resistance of 32 to 140 Degrees Fahrenheit, It Holds CE and IEC Approvals. This Float is Ideal for Managing Sewage Liquids and Solids with Peace of Mind. We Confidently Offer an Unrivaled 5 Year Warranty Against Manufacturer Defects

ProPlumber   2-in Plastic Inside Flush Coupling

This 2-in PVC inside flush coupling connect plastic pipe together. The design assures a tight joint at pipe. It is NSF certified.

ProPlumber   1-1/4-in Plastic Inside Flush Coupling

This 1-1/4-in PVC inside flush coupling connect plastic pipe together. The design assures a tight joint at pipe. It is NSF certified.

ProPlumber   Plastic Coupling

This 1-1/2-in PVC inside flush coupling connect plastic pipe together. The design assures a tight joint at pipe. It is NSF certified.

ProPlumber   Pressure Fitting Kit

This pressure fitting kit works with jet pumps, jet pump pressure regulators, and a frost-proof yard hydrant drain It includes 1/4-in and 1/8-in elbows and a plastic tube to connect jet pumps to a pressure switch. These pieces are corrosion resistant.

ProPlumber   Replacement Switch for Pedestal Sump Pump

This replacement switch is designed for pedestal pumps. The switch is designed to turn the pump on and off depending on the water level. The pedestal replacement switch is constructed of thermoplastic material.

ProPlumber   1/8-in Air Valve

This 1/8-in air valve provides method of injecting and holding air pressure in galvanized water systems. It is used for shallow and deep well pump systems. This piece is corrosion resistant.

ProPlumber   1-in Steel Well Elbow

This 1-in well ell connects two flexible plastics pipes. It is constructed of sturdy galvanized steel.

ProPlumber   36-in x 1-1/4-in Plastic Well Point

This 36-in plastic well point is engineered to provide an ideal combination of easy driving, effective sand control, corrosion resistance and strength. The threaded octagon shoulder prevents turning while driving and forms a hole large enough to allow clearance for pipe couplings.

ProPlumber   48-in x 2-in Plastic Well Point

This 48-in plastic well point is engineered to provide an ideal combination of easy driving, effective sand control, corrosion resistance and strength. The threaded octagon shoulder prevents turning while driving and forms a hole large enough to allow clearance for pipe couplings.

ProPlumber   60-in x 1-1/4-in Plastic Well Point

This 60-in plastic well point is engineered to provide an ideal combination of easy driving, effective sand control, corrosion resistance and strength. The threaded octagon shoulder prevents turning while driving and forms a hole large enough to allow clearance for pipe couplings.