Supply stop Shut-Off Valves

SharkBite   1/2-in Push-to-connect x 3/8-in OD Compression Brushed nickel Quarter turn Stop Angle valve

SharkBite Max push-to-connect stop valves are the fastest and easiest way to connect to PEX, copper, CPVC, or PE-RT stub-outs, which control and shut off water flow to fixtures or appliances. This newly designed fitting features a stainless-steel collet retainer which delivers additional strength and durability. SharkBite Max fittings and valves don’t require a PEX tube liner and a re-engineered body allows you to insert the pipe using less force and greater ease. The single lever quarter turn handle allows for quick control over water flow, especially in tight spaces. No soldering, clamps, unions, glue, or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The valve can be rotated after installation for quick adjustments, and removing the valve is just as fast with a disconnect tool, allowing them to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.)

SharkBite   1/2-in Push-to-connect x 3/8-in OD Compression Brass Quarter turn Stop Angle valve 2 -Pack

EvoPEX quarter-turn stop valves are an easy to install solution providing a quick shut-off to common household fixtures such as toilets and faucets. The SharkBite EvoPEX system is a push-to-connect rough-in plumbing solution that requires no special tools, crimp or clamp rings to make a connection. EvoPEX fittings improve efficiency and reduce installation time. Green visual indicator lets you know when pipe is inserted to the proper depth and reduces the risk of installation errors and potential leaks. Made from high-performance acudel polymer, which provides outstanding chemical and chloramine resistance along with excellent anti-decay stability and dimensional stability. SharkBite PEX pipe and EvoPEX fittings are made in the USA and come with a 25-year system warranty.

SharkBite   3/8-in PEX Barb x 3/8-in PEX Barb Brass Quarter turn Stop Straight valve

The SharkBite 3/8-in PEX barb x 3/8-in PEX barb straight stop quarter-turn valve controls water flow. The straight stop valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home.

Keeney   1/2-in PEX x 3/8-in Compression Brass Quarter turn Stop Angle valve

Keeney’s quarter turn angle valve is the perfect solution to your project. Our No Crimp PEX products allow for a quick and easy installation without any specialty tools or additional crimps. This valve has an inlet for 1/2-in. PEX connections and an outlet of 3/8-in.O.D. Tightening the nut onto the valve compresses the split ring sleeve around the pipe, internal barb, and double O-ring for a seal that produces a leak-free connection. It’s constructed of solid brass that meets lead-free requirements and is chrome plated to match existing bathroom fixtures. You can install with confidence knowing Keeney stands by this product with a Limited Warranty.

SharkBite   1/2-in Push-to-connect x 1/4-in Compression Brass Quarter turn Stop Straight valve

SharkBite Max push-to-connect stop valves are the fastest and easiest way to connect to PEX, copper, CPVC, or PE-RT stub-outs, which control and shut off water flow to fixtures or appliances. This newly designed fitting features a stainless steel collet retainer which delivers additional strength and durability. SharkBite Max fittings and valves don’t require a PEX tube liner and a re-engineered body allows you to insert the pipe using less force and greater ease. The single lever quarter turn handle allows for quick control over water flow, especially in tight spaces. No soldering, clamps, unions, glue, or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The valve can be rotated after installation for quick adjustments, and removing the valve is just as fast with a disconnect tool, allowing them to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventional plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.)

SharkBite   1/2-in Push-to-connect x 3/8-in Compression Brass Quarter turn Stop Supply stop

SharkBite Max push-to-connect stop valves are the fastest and easiest way to connect to PEX, copper, CPVC, or PE-RT stub-outs, which control and shut off water flow to fixtures or appliances. This newly designed fitting features a stainless steel collet retainer which delivers additional strength and durability. SharkBite Max fittings and valves don’t require a PEX tube liner and a re-engineered body allows you to insert the pipe using less force and greater ease. The single lever quarter turn handle allows for quick control over water flow, especially in tight spaces. No soldering, clamps, unions, glue, or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The valve can be rotated after installation for quick adjustments, and removing the valve is just as fast with a disconnect tool, allowing them to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventional plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.)

SharkBite   1/2-in Push-to-connect x 1/4-in Push-to-connect Brass Quarter turn Stop Angle valve

SharkBite push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stub outs. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

SharkBite   1/2-in FIP x 3/8-in 1/4-in OD Compression Brass Stop Add-a-tee

SharkBite FIP inlet X compression outlet tee adapters allow for an additional outlet on any supply stop valve. The swivel nut threads onto the supply stop valve, then the supply lines are threaded onto the male compression outlets.

John Guest   3/8-in OD compression x 1/4-in Push-to-connect Polypropylene Quarter turn Stop Supply stop

The John Guest 3/8 in. x 3/8 in. x 1/4 in. push-to-connect angle stop adapter valve valves are manufactured from white polypropylene and equipped with EPDM O-rings utilizing John Guest’s push-fit technology to make easy, reliable, leak-free connections. They have been developed to satisfy the compatibility needs for a wide range of applications and can be used on plastic or soft copper tubing. To make a connection, the tube is simply pushed in by hand; the unique John Guest collet locking system holds the tubing firmly in place. Disconnection is just as easy and requires no special tools.

SharkBite   1/2-in Push-to-connect x 3/8-in OD Compression Brass Quarter turn Stop Straight valve 2 -Pack

EvoPEX quarter-turn stop valves are an easy to install solution providing a quick shut-off to common household fixtures such as toilets and faucets. The SharkBite EvoPEX system is a push-to-connect rough-in plumbing solution that requires no special tools, crimp or clamp rings to make a connection. EvoPEX fittings improve efficiency and reduce installation time. Green visual indicator lets you know when pipe is inserted to the proper depth and reduces the risk of installation errors and potential leaks. Made from high-performance acudel polymer, which provides outstanding chemical and chloramine resistance along with excellent anti-decay stability and dimensional stability. SharkBite PEX pipe and EvoPEX fittings are made in the USA and come with a 25-year system warranty.

ProLine Series   1/2-in FIP x 1/2-in FIP Brass Quarter turn Stop Stop and waste valve

Ground Key and Stop Drain Valves are ideal for use as main shutoff's in sprinkler systems. When the valve is turned off it will automatically drain relieving pressure in the line. The bronze construction allows for additional corrosion resistance which creates a long-lasting valve.

ProLine Series   3/4-in FIP x 3/4-in FIP Brass Quarter turn Stop Stop and waste valve

Ground Key and Stop Drain Valves are ideal for use as main shutoff's in sprinkler systems. When the valve is turned off it will automatically drain relieving pressure in the line. The bronze construction allows for additional corrosion resistance which creates a long-lasting valve.

Watts   3/8-in Push-to-connect x 3/8-in Push-to-connect Polymer Quarter turn Stop Straight valve

This 3/8 In. quick connect straight valve works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. Easy to install, no tools or tube inserts required and the fittings can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, it joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel making the quick connect fitting ideal for vibrating and dynamic applications.

ProLine Series   1-in FIP x 1-in FIP Brass Quarter turn Stop Stop and waste valve

Ground Key and Stop Drain Valves are ideal for use as main shutoff's in sprinkler systems. When the valve is turned off it will automatically drain relieving pressure in the line. The bronze construction allows for additional corrosion resistance which creates a long-lasting valve.

Watts   1/4-in Push-to-connect x 1/4-in Push-to-connect Polymer Quarter turn Stop Straight valve

This 1/4 In. quick connect straight valve works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. Easy to install, no tools or tube inserts required and the fittings can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, it joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel making the quick connect fitting ideal for vibrating and dynamic applications.

Watts   MNPT x MNPT Brass Push/Pull Stop Washing machine valve

This 1/2 IN manual washing machine shutoff valve is designed to control water flow from the water supply to the flexible hoses connected to a washing machine. It has a single Duo-Cloz lever to turn both hot and cold water on or off quickly and can eliminate water pressure on supply hoses to prevent catastrophic water damage. This shutoff valve has a brass body construction, brass ball valves with long wearing PTFE seats, 1/2 inch copper dual ell adapters for solder or compression connections to receive tubing and 3/4 inch hose connections. The maximum pressure is 150 psi (10.3 bar) and the maximum temperature is 180 degree F.

Watts   MNPT x MNPT Brass Push/Pull Stop Washing machine valve

This 1/2 IN manual washing machine shutoff valve is designed to control water flow from the water supply to the flexible hoses feeding to a washing machine. This single Duo-Cloz lever to turn both hot and cold water on or off quickly and can eliminate water pressure on supply hoses to prevent catastrophic water damage. This shutoff valve has a brass body construction, brass ball valves with long wearing PTFE seats, 1/2 inch dual copper straight adapters for 1/2 inch male NPT or 1/2 inch solder end connections to receive tubing and 3/4 inch hose connections. The maximum pressure is 150 psi (10.3 bar) and the maximum temperature is 180 degree F.

WESTBRASS   5/8-in Compression x 3/8-in Compression Brass Quarter Turn Stop Angle Valve

This angle stop with a decorative cross handle is the perfect compliment for sinks and toilets. The stop features a 1/4-turn ball valve for a long lasting positive, reliable seal. The unit fastens to a 5/8 In. compression inlet (for 1/2 In. copper pipe) and a 3/8 In. OD compression outlet with nut and ferrule. The angle stops are brass, created in a variety of decorative finishes, designed to compliment your decor.

SharkBite   1/2-in Copper sweat x 3/8-in OD Compression Brass Quarter turn Stop Straight valve

SharkBite quarter turn ball valves with copper sweat connections are a secure way to provide water to ice makers, toilets and faucets. Solder the valve onto the pipe, then connect the supply line to the valve. The quarter turn shut off provides an easy and maintenance free shut off for your fixtures.